hello,

kb. egy hete használok linuxot, és meglepõen jól mennek a dolgok – bár az én kis dos-on felnevelt fejemnek elõször nem tûnt logikusnak, hogy egy könyvtárban keressem a cd-t, de ez csak öt percig volt így…
a kérdésem a következõ lenne:
– a linuxot sulinetes cd-rõl telepítettem (ne kérdezzétek honnan szereztem: WinXP-re cseréltem  😉  hehh…) és eddig az az egyetlen ratyi jelentkezett, hogy Gnome-ból és KDE-bõl (mást csak egzotikumszinten néztem 😀 ) folyamatosan dobál ki a login screen-re, még a leglájtosabb multitaszkingkor is… – tud valaki erre valamit mondani?
– elõfordult hasonló hiba mással is?

kösz, srácok!
[align=right][snapback]86450[/snapback][/align]

/var/log/XFree86.0.log tartalmát másold be ide léci. Hátha valamit megtudunk.
Milyen vid. kártya? Meg mennyire rendszeresen történik az eset?

kl233, mezei- és super userként is dobál. marhára belassul, kattan egyet a képernyõ, majd kidob. az elõbb is, amikor éppen a fájkezelõt nyitottam meg (fut még: XMMS; Galleon; Ximian Evolution).

aty:

3d blaster banshee 16Megás kártya… tudom, nem valami whoááá kártya, de szövegszerkesztésre/ netezésre / filmekhez / képeszerkesztéshez / egyes játékokhoz elég.
és voilá a logfile:

XFree86 Version 4.3.0.1
Release Date: 9 May 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.20-11smp i686 [ELF]
Build Date: 16 February 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (–) probed, (**) from config file, (==)default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: „/var/log/XFree86.0.log”, Time: Mon Sep 27 18:26:38 2004
(==) Using config file: „/etc/X11/XF86Config”
(==) ServerLayout „UHU-Layout”
(**) |–>Screen „UHU-Screen” (0)
(**) | |–>Monitor „UHU-Monitor”
(**) | |–>Device „UHU-Card”
(**) |–>Input Device „UHU-Keyboard”
(**) Option „AutoRepeat” „250 30”
(**) Option „XkbRules” „xfree86”
(**) XKB: rules: „xfree86”
(**) Option „XkbModel” „pc105”
(**) XKB: model: „pc105”
(**) Option „XkbLayout” „hu”
(**) XKB: layout: „hu”
(==) Keyboard: CustomKeycode disabled
(**) |–>Input Device „UHU-Mouse”
(WW) The directory „/usr/share/fonts/unifont” does not exist.
Entry deleted from font path.
(WW) The directory „/usr/share/fonts/jmk” does not exist.
Entry deleted from font path.
(**) FontPath set to „/usr/share/fonts/local,/usr/share/fonts/misc:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/misc,/usr/share/fonts/75dpi,/usr/share/fonts/100dpi,/usr/share/fonts/TTF,/usr/share/fonts/Type1,/usr/share/fonts/Speedo,/usr/share/fonts/ghostscript,/usr/share/fonts/freefont”
(**) RgbPath set to „/usr/lib/X11/rgb”
(**) ModulePath set to „/usr/lib/X11/modules”
(**) Option „AllowMouseOpenFail”
(++) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: „bitmap”
(II) Loading /usr/lib/X11/modules/fonts/libbitmap.a
(II) Module bitmap: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: „pcidata”
(II) Loading /usr/lib/X11/modules/libpcidata.a
(II) Module pcidata: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80008bc0, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 147b,7411 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0b:0: chip 1113,1216 card 10b8,a255 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:0f:0: chip 1013,6003 card 1489,7003 rev 01 class 04,01,00 hdr 00
(II) PCI: 00:11:0: chip 1106,3147 card 1106,3147 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:2: chip 1106,3038 card 147b,7411 rev 23 class 0c,03,00 hdr 00
(II) PCI: 00:11:3: chip 1106,3038 card 147b,7411 rev 23 class 0c,03,00 hdr 00
(II) PCI: 01:00:0: chip 121a,0003 card 1102,1018 rev 03 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 – 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 – 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 – 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 – 0x0000d0ff (0x100) IX
[1] -1 0 0x0000d400 – 0x0000d4ff (0x100) IX
[2] -1 0 0x0000d800 – 0x0000d8ff (0x100) IX
[3] -1 0 0x0000dc00 – 0x0000dcff (0x100) IX
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe4000000 – 0xe7ffffff (0x4000000) MX
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe8000000 – 0xe9ffffff (0x2000000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(–) PCI:*(1:0:0) 3Dfx Interactive, Inc. Voodoo Banshee rev 3, Mem @ 0xe4000000/25, 0xe8000000/25, I/O @ 0xd000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 – 0xffffffff (0x0) MX
[1] -1 0 0x00000000 – 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 – 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[4] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[5] -1 0 0x0000ffff – 0x0000ffff (0x1) IX
[6] -1 0 0x00000000 – 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xeb000000 – 0xeb0fffff (0x100000) MX
[1] -1 0 0xeb100000 – 0xeb100fff (0x1000) MX
[2] -1 0 0xeb101000 – 0xeb1013ff (0x400) MX
[3] -1 0 0xe0000000 – 0xdfffffff (0x0) MXO
[4] -1 0 0xe8000000 – 0xe9ffffff (0x2000000) MX(B)
[5] -1 0 0xe4000000 – 0xe5ffffff (0x2000000) MX(B)
[6] -1 0 0x0000ec00 – 0x0000ec1f (0x20) IX
[7] -1 0 0x0000e800 – 0x0000e81f (0x20) IX
[8] -1 0 0x0000e400 – 0x0000e40f (0x10) IX
[9] -1 0 0x0000e000 – 0x0000e0ff (0x100) IX
[10] -1 0 0x0000d000 – 0x0000d0ff (0x100) IX(B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xeb000000 – 0xeb0fffff (0x100000) MX
[1] -1 0 0xeb100000 – 0xeb100fff (0x1000) MX
[2] -1 0 0xeb101000 – 0xeb1013ff (0x400) MX
[3] -1 0 0xe0000000 – 0xdfffffff (0x0) MXO
[4] -1 0 0xe8000000 – 0xe9ffffff (0x2000000) MX(B)
[5] -1 0 0xe4000000 – 0xe5ffffff (0x2000000) MX(B)
[6] -1 0 0x0000ec00 – 0x0000ec1f (0x20) IX
[7] -1 0 0x0000e800 – 0x0000e81f (0x20) IX
[8] -1 0 0x0000e400 – 0x0000e40f (0x10) IX
[9] -1 0 0x0000e000 – 0x0000e0ff (0x100) IX
[10] -1 0 0x0000d000 – 0x0000d0ff (0x100) IX(B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 – 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[4] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[5] -1 0 0x0000ffff – 0x0000ffff (0x1) IX
[6] -1 0 0x00000000 – 0x000000ff (0x100) IX
(II) All system resource ranges:
[0] -1 0 0xffe00000 – 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[4] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[5] -1 0 0xeb000000 – 0xeb0fffff (0x100000) MX
[6] -1 0 0xeb100000 – 0xeb100fff (0x1000) MX
[7] -1 0 0xeb101000 – 0xeb1013ff (0x400) MX
[8] -1 0 0xe0000000 – 0xdfffffff (0x0) MXO
[9] -1 0 0xe8000000 – 0xe9ffffff (0x2000000) MX(B)
[10] -1 0 0xe4000000 – 0xe5ffffff (0x2000000) MX(B)
[11] -1 0 0x0000ffff – 0x0000ffff (0x1) IX
[12] -1 0 0x00000000 – 0x000000ff (0x100) IX
[13] -1 0 0x0000ec00 – 0x0000ec1f (0x20) IX
[14] -1 0 0x0000e800 – 0x0000e81f (0x20) IX
[15] -1 0 0x0000e400 – 0x0000e40f (0x10) IX
[16] -1 0 0x0000e000 – 0x0000e0ff (0x100) IX
[17] -1 0 0x0000d000 – 0x0000d0ff (0x100) IX(B)
(II) LoadModule: „record”
(II) Loading /usr/lib/X11/modules/extensions/librecord.a
(II) Module record: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: „extmod”
(II) Loading /usr/lib/X11/modules/extensions/libextmod.a
(II) Module extmod: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: „dbe”
(II) Loading /usr/lib/X11/modules/extensions/libdbe.a
(II) Module dbe: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: „dri”
(II) Loading /usr/lib/X11/modules/extensions/libdri.a
(II) Module dri: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module „drm”
(II) LoadModule: „drm”
(II) Loading /usr/lib/X11/modules/linux/libdrm.a
(II) Module drm: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: „v4l”
(II) Loading /usr/lib/X11/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 0.0.1
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: „type1”
(II) Loading /usr/lib/X11/modules/fonts/libtype1.a
(II) Module type1: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: „speedo”
(II) Loading /usr/lib/X11/modules/fonts/libspeedo.a
Skipping „/usr/lib/X11/modules/fonts/libspeedo.a:spencode.o”: No symbols found
(II) Module speedo: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: „xtt”
(II) Loading /usr/lib/X11/modules/fonts/libxtt.a
(II) Module xtt: vendor=”X-TrueType Server Project”
compiled for 4.3.0.1, module version = 1.3.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font xtt
(II) LoadModule: „glx”
(II) Loading /usr/lib/X11/modules/extensions/libglx.a
(II) Module glx: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module „GLcore”
(II) LoadModule: „GLcore”
(II) Loading /usr/lib/X11/modules/extensions/libGLcore.a
Skipping „/usr/lib/X11/modules/extensions/libGLcore.a:m_debug_clip.o”: No symbols found
Skipping „/usr/lib/X11/modules/extensions/libGLcore.a:m_debug_norm.o”: No symbols found
Skipping „/usr/lib/X11/modules/extensions/libGLcore.a:m_debug_xform.o”: No symbols found
Skipping „/usr/lib/X11/modules/extensions/libGLcore.a:m_debug_vertex.o”: No symbols found
(II) Module GLcore: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: „tdfx”
(II) Loading /usr/lib/X11/modules/drivers/tdfx_drv.o
(II) Module tdfx: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: „mouse”
(II) Loading /usr/lib/X11/modules/input/mouse_drv.o
(II) Module mouse: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
3dfx Voodoo3, 3dfx Voodoo5
(II) Primary Device is: PCI 01:00:0
(–) Assigning device section with no busID to primary device
(–) Chipset 3dfx Banshee found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 – 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[4] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[5] -1 0 0xeb000000 – 0xeb0fffff (0x100000) MX
[6] -1 0 0xeb100000 – 0xeb100fff (0x1000) MX
[7] -1 0 0xeb101000 – 0xeb1013ff (0x400) MX
[8] -1 0 0xe0000000 – 0xdfffffff (0x0) MXO
[9] -1 0 0xe8000000 – 0xe9ffffff (0x2000000) MX(B)
[10] -1 0 0xe4000000 – 0xe5ffffff (0x2000000) MX(B)
[11] -1 0 0x0000ffff – 0x0000ffff (0x1) IX
[12] -1 0 0x00000000 – 0x000000ff (0x100) IX
[13] -1 0 0x0000ec00 – 0x0000ec1f (0x20) IX
[14] -1 0 0x0000e800 – 0x0000e81f (0x20) IX
[15] -1 0 0x0000e400 – 0x0000e40f (0x10) IX
[16] -1 0 0x0000e000 – 0x0000e0ff (0x100) IX
[17] -1 0 0x0000d000 – 0x0000d0ff (0x100) IX(B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 – 0xffffffff (0x200000) MX(B)
[1] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[2] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[3] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[4] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[5] -1 0 0xeb000000 – 0xeb0fffff (0x100000) MX
[6] -1 0 0xeb100000 – 0xeb100fff (0x1000) MX
[7] -1 0 0xeb101000 – 0xeb1013ff (0x400) MX
[8] -1 0 0xe0000000 – 0xdfffffff (0x0) MXO
[9] -1 0 0xe8000000 – 0xe9ffffff (0x2000000) MX(B)
[10] -1 0 0xe4000000 – 0xe5ffffff (0x2000000) MX(B)
[11] 0 0 0x000a0000 – 0x000affff (0x10000) MS
[12] 0 0 0x000b0000 – 0x000b7fff (0x8000) MS
[13] 0 0 0x000b8000 – 0x000bffff (0x8000) MS
[14] -1 0 0x0000ffff – 0x0000ffff (0x1) IX
[15] -1 0 0x00000000 – 0x000000ff (0x100) IX
[16] -1 0 0x0000ec00 – 0x0000ec1f (0x20) IX
[17] -1 0 0x0000e800 – 0x0000e81f (0x20) IX
[18] -1 0 0x0000e400 – 0x0000e40f (0x10) IX
[19] -1 0 0x0000e000 – 0x0000e0ff (0x100) IX
[20] -1 0 0x0000d000 – 0x0000d0ff (0x100) IX(B)
[21] 0 0 0x000003b0 – 0x000003bb (0xc) IS
[22] 0 0 0x000003c0 – 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) Loading sub module „vgahw”
(II) LoadModule: „vgahw”
(II) Loading /usr/lib/X11/modules/libvgahw.a
(II) Module vgahw: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module „int10”
(II) LoadModule: „int10”
(II) Loading /usr/lib/X11/modules/linux/libint10.a
(II) Module int10: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) TDFX(0): Softbooting the board (through the int10 interface).
(II) TDFX(0): Primary V_BIOS segment is: 0xc000
(II) TDFX(0): Softbooting the board succeeded.
(II) TDFX(0): TDFXFindChips: found 1 chip(s)
(**) TDFX(0): Depth 24, (–) framebuffer bpp 32
(==) TDFX(0): RGB weight 888
(==) TDFX(0): Default visual is TrueColor
(–) TDFX(0): Chipset: „3dfx Banshee”
(–) TDFX(0): Linear framebuffer at 0xE8000000
(–) TDFX(0): MMIO registers at addr 0xE4000000
(–) TDFX(0): PIO registers at addr 0xD000
(II) TDFX(0): DRAMINIT1 read 0x23c031, programming 0x202031 (not Banshee)
(II) TDFX(0): TDFXInitChips: numchips = 1
(II) TDFX(0): TDFXInitChips: cfgbits = 0x00000000, initbits = 0x00000001
(II) TDFX(0): TDFXInitChips: mem0base = 0xe4000000, mem1base = 0xe8000008
(II) TDFX(0): TDFXInitChips: mem0size = 0x02000000, mem1size = 0x02000000
(II) TDFX(0): TDFXInitChips: mem0bits = 0x00000005, mem1bits = 0x00000050
(II) TDFX(0): TDFXInitChips: cfgbits = 0x00000055
(II) TDFX(0): TDFXInitChips: MMIOAddr[0] = 0xe4000000
(II) TDFX(0): TDFXInitChips: LinearAddr[0] = 0xe8000008
(–) TDFX(0): VideoRAM: 16384 kByte Mapping 32768 kByte
(==) TDFX(0): Using gamma correction (1.0, 1.0, 1.0)
(II) TDFX(0): UHU-Monitor: Using hsync range of 30.00-63.00 kHz
(II) TDFX(0): UHU-Monitor: Using vrefresh range of 50.00-77.00 Hz
(II) TDFX(0): Clock range: 12.00 to 270.00 MHz
(II) TDFX(0): Not using mode „400×256” (vrefresh out of range)
(II) TDFX(0): Not using mode „640×480” (vrefresh out of range)
(II) TDFX(0): Not using mode „640×480” (vrefresh out of range)
(II) TDFX(0): Not using mode „640×480” (vrefresh out of range)
(II) TDFX(0): Not using mode „640×480” (vrefresh out of range)
(II) TDFX(0): Not using mode „800×600” (vrefresh out of range)
(II) TDFX(0): Not using mode „800×600” (vrefresh out of range)
(II) TDFX(0): Not using mode „800×600” (hsync out of range)
(II) TDFX(0): Not using mode „800×600” (hsync out of range)
(II) TDFX(0): Not using mode „1024×768” (hsync out of range)
(II) TDFX(0): Not using mode „1024×768” (hsync out of range)
(II) TDFX(0): Not using mode „1024×768” (hsync out of range)
(II) TDFX(0): Not using mode „1024×768” (hsync out of range)
(II) TDFX(0): Not using mode „1024×768” (hsync out of range)
(II) TDFX(0): Not using mode „1024×768” (hsync out of range)
(II) TDFX(0): Not using mode „1024×768” (hsync out of range)
(II) TDFX(0): Not using mode „1152×864” (hsync out of range)
(II) TDFX(0): Not using mode „1152×864” (hsync out of range)
(II) TDFX(0): Not using mode „1152×864” (hsync out of range)
(II) TDFX(0): Not using mode „1152×864” (hsync out of range)
(II) TDFX(0): Not using mode „1152×864” (hsync out of range)
(II) TDFX(0): Not using mode „1152×864” (hsync out of range)
(II) TDFX(0): Not using mode „1280×960” (hsync out of range)
(II) TDFX(0): Not using mode „1280×960” (hsync out of range)
(II) TDFX(0): Not using mode „1280×960” (hsync out of range)
(II) TDFX(0): Not using mode „1280×960” (hsync out of range)
(II) TDFX(0): Not using mode „1280×960” (hsync out of range)
(II) TDFX(0): Not using mode „1280×960” (hsync out of range)
(II) TDFX(0): Not using mode „1280×1024” (hsync out of range)
(II) TDFX(0): Not using mode „1280×1024” (hsync out of range)
(II) TDFX(0): Not using mode „1280×1024” (hsync out of range)
(II) TDFX(0): Not using mode „1280×1024” (hsync out of range)
(II) TDFX(0): Not using mode „1280×1024” (hsync out of range)
(II) TDFX(0): Not using mode „1280×1024” (hsync out of range)
(II) TDFX(0): Not using mode „1400×1050” (hsync out of range)
(II) TDFX(0): Not using mode „1400×1050” (unknown reason)
(II) TDFX(0): Not using mode „1400×1050” (unknown reason)
(II) TDFX(0): Not using mode „1400×1050” (unknown reason)
(II) TDFX(0): Not using mode „1400×1050” (unknown reason)
(II) TDFX(0): Not using mode „1400×1050” (unknown reason)
(II) TDFX(0): Not using mode „1400×1050” (unknown reason)
(II) TDFX(0): Not using mode „1600×1200” (hsync out of range)
(II) TDFX(0): Not using mode „1600×1200” (hsync out of range)
(II) TDFX(0): Not using mode „1600×1200” (hsync out of range)
(II) TDFX(0): Not using mode „1600×1200” (hsync out of range)
(II) TDFX(0): Not using mode „1600×1200” (bad mode clock/interlace/doublescan)
(II) TDFX(0): Not using mode „1600×1200” (bad mode clock/interlace/doublescan)
(II) TDFX(0): Not using mode „1600×1200” (bad mode clock/interlace/doublescan)
(II) TDFX(0): Not using default mode „640×350” (vrefresh out of range)
(II) TDFX(0): Not using default mode „320×175” (vrefresh out of range)
(II) TDFX(0): Not using default mode „640×400” (vrefresh out of range)
(II) TDFX(0): Not using default mode „320×200” (vrefresh out of range)
(II) TDFX(0): Not using default mode „720×400” (vrefresh out of range)
(II) TDFX(0): Not using default mode „360×200” (vrefresh out of range)
(II) TDFX(0): Not using default mode „320×240” (vrefresh out of range)
(II) TDFX(0): Not using default mode „400×300” (vrefresh out of range)
(II) TDFX(0): Not using default mode „512×384” (bad mode clock/interlace/doublescan)
(II) TDFX(0): Not using default mode „512×384” (hsync out of range)
(II) TDFX(0): Not using default mode „576×432” (hsync out of range)
(II) TDFX(0): Not using default mode „640×512” (hsync out of range)
(II) TDFX(0): Not using default mode „640×512” (hsync out of range)
(II) TDFX(0): Not using default mode „640×512” (hsync out of range)
(II) TDFX(0): Not using default mode „1792×1344” (hsync out of range)
(II) TDFX(0): Not using default mode „896×672” (hsync out of range)
(II) TDFX(0): Not using default mode „1792×1344” (hsync out of range)
(II) TDFX(0): Not using default mode „896×672” (hsync out of range)
(II) TDFX(0): Not using default mode „1856×1392” (hsync out of range)
(II) TDFX(0): Not using default mode „928×696” (hsync out of range)
(II) TDFX(0): Not using default mode „1856×1392” (bad mode clock/interlace/doublescan)
(II) TDFX(0): Not using default mode „928×696” (hsync out of range)
(II) TDFX(0): Not using default mode „1920×1440” (hsync out of range)
(II) TDFX(0): Not using default mode „960×720” (hsync out of range)
(II) TDFX(0): Not using default mode „1920×1440” (bad mode clock/interlace/doublescan)
(II) TDFX(0): Not using default mode „960×720” (hsync out of range)
(II) TDFX(0): Not using default mode „700×525” (hsync out of range)
(II) TDFX(0): Not using default mode „700×525” (hsync out of range)
(II) TDFX(0): Not using default mode „1600×1024” (hsync out of range)
(II) TDFX(0): Not using default mode „800×512” (hsync out of range)
(II) TDFX(0): Not using default mode „1920×1440” (bad mode clock/interlace/doublescan)
(II) TDFX(0): Not using default mode „960×720” (hsync out of range)
(II) TDFX(0): Not using default mode „2048×1536” (hsync out of range)
(II) TDFX(0): Not using default mode „2048×1536” (bad mode clock/interlace/doublescan)
(II) TDFX(0): Not using default mode „2048×1536” (bad mode clock/interlace/doublescan)
(II) TDFX(0): Not using mode „1280×1024” (width too large for virtual size)
(II) TDFX(0): Not using mode „1280×960” (width too large for virtual size)
(II) TDFX(0): Not using mode „1152×864” (width too large for virtual size)
(II) TDFX(0): Not using default mode „1152×768” (width too large for virtual size)
(–) TDFX(0): Virtual size is 1024×768 (pitch 1024)
(**) TDFX(0): *Mode „1024×768”: 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) TDFX(0): Modeline „1024×768” 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
(**) TDFX(0): *Mode „800×600”: 48.9 MHz, 47.0 kHz, 75.0 Hz
(II) TDFX(0): Modeline „800×600” 48.91 800 840 920 1040 600 601 604 627 -hsync +vsync
(**) TDFX(0): *Mode „640×480”: 30.7 MHz, 37.6 kHz, 75.0 Hz
(II) TDFX(0): Modeline „640×480” 30.72 640 664 728 816 480 481 484 502 -hsync +vsync
(**) TDFX(0): Mode „1024×768”: 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) TDFX(0): Modeline „1024×768” 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
(**) TDFX(0): Mode „1024×768”: 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) TDFX(0): Modeline „1024×768” 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) TDFX(0): Default mode „832×624”: 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) TDFX(0): Modeline „832×624” 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync
(**) TDFX(0): Mode „800×600”: 46.9 MHz, 45.1 kHz, 72.0 Hz
(II) TDFX(0): Modeline „800×600” 46.87 800 840 920 1040 600 601 604 626 -hsync +vsync
(**) TDFX(0): Mode „800×600”: 38.2 MHz, 37.3 kHz, 60.0 Hz
(II) TDFX(0): Modeline „800×600” 38.22 800 832 912 1024 600 601 604 622 -hsync +vsync
(**) TDFX(0): Mode „640×480”: 29.4 MHz, 36.1 kHz, 72.0 Hz
(II) TDFX(0): Modeline „640×480” 29.43 640 664 728 816 480 481 484 501 -hsync +vsync
(**) TDFX(0): Mode „640×480”: 23.9 MHz, 29.8 kHz, 60.0 Hz
(II) TDFX(0): Modeline „640×480” 23.86 640 656 720 800 480 481 484 497 -hsync +vsync
(**) TDFX(0): Default mode „576×384”: 32.5 MHz, 44.2 kHz, 54.8 Hz (D)
(II) TDFX(0): Modeline „576×384” 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync
(**) TDFX(0): Default mode „512×384”: 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
(II) TDFX(0): Modeline „512×384” 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync
(**) TDFX(0): Default mode „512×384”: 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
(II) TDFX(0): Modeline „512×384” 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync
(**) TDFX(0): Default mode „512×384”: 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
(II) TDFX(0): Modeline „512×384” 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync
(**) TDFX(0): Default mode „416×312”: 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
(II) TDFX(0): Modeline „416×312” 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync
(**) TDFX(0): Default mode „400×300”: 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
(II) TDFX(0): Modeline „400×300” 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync
(**) TDFX(0): Default mode „400×300”: 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
(II) TDFX(0): Modeline „400×300” 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync
(**) TDFX(0): Default mode „400×300”: 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) TDFX(0): Modeline „400×300” 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync
(**) TDFX(0): Default mode „400×300”: 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) TDFX(0): Modeline „400×300” 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync
(**) TDFX(0): Default mode „320×240”: 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
(II) TDFX(0): Modeline „320×240” 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync
(**) TDFX(0): Default mode „320×240”: 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
(II) TDFX(0): Modeline „320×240” 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync
(**) TDFX(0): Default mode „320×240”: 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) TDFX(0): Modeline „320×240” 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync
(==) TDFX(0): DPI set to (75, 75)
(II) Loading sub module „fb”
(II) LoadModule: „fb”
(II) Loading /usr/lib/X11/modules/libfb.a
(II) Module fb: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module „xaa”
(II) LoadModule: „xaa”
(II) Loading /usr/lib/X11/modules/libxaa.a
(II) Module xaa: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) TDFX(0): ShowCache Disabled
(**) TDFX(0): video key default 0x1e
(II) Loading sub module „ramdac”
(II) LoadModule: „ramdac”
(II) Loading /usr/lib/X11/modules/libramdac.a
(II) Module ramdac: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module „ddc”
(II) LoadModule: „ddc”
(II) Loading /usr/lib/X11/modules/libddc.a
(II) Module ddc: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module „vbe”
(II) LoadModule: „vbe”
(II) Loading /usr/lib/X11/modules/libvbe.a
(II) Module vbe: vendor=”The XFree86 Project”
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module „int10”
(II) LoadModule: „int10”
(II) Reloading /usr/lib/X11/modules/linux/libint10.a
(II) TDFX(0): initializing int10
(II) TDFX(0): Primary V_BIOS segment is: 0xc000
(II) TDFX(0): VESA BIOS detected
(II) TDFX(0): VESA VBE Version 3.0
(II) TDFX(0): VESA VBE Total Mem: 16384 kB
(II) TDFX(0): VESA VBE OEM: 3Dfx Interactive, Inc.
(II) TDFX(0): VESA VBE OEM Software Rev: 1.0
(II) TDFX(0): VESA VBE OEM Vendor: Elpin Systems, Inc.
(II) TDFX(0): VESA VBE OEM Product: 3Dfx Banshee
(II) TDFX(0): VESA VBE OEM Product Rev: Version 1.00
(II) Loading sub module „ddc”
(II) LoadModule: „ddc”
(II) Reloading /usr/lib/X11/modules/libddc.a
(II) TDFX(0): VESA VBE DDC supported
(II) TDFX(0): VESA VBE DDC Level none
(II) TDFX(0): VESA VBE DDC transfer in appr. 0 sec.
(II) TDFX(0): VESA VBE DDC read failed
(–) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don’t.
(II) resource ranges after preInit:
[0] 0 0 0xe8000000 – 0xe9ffffff (0x2000000) MX
[1] 0 0 0xe4000000 – 0xe5ffffff (0x2000000) MX
[2] -1 0 0xffe00000 – 0xffffffff (0x200000) MX(B)
[3] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[4] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[5] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[6] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[7] -1 0 0xeb000000 – 0xeb0fffff (0x100000) MX
[8] -1 0 0xeb100000 – 0xeb100fff (0x1000) MX
[9] -1 0 0xeb101000 – 0xeb1013ff (0x400) MX
[10] -1 0 0xe0000000 – 0xdfffffff (0x0) MXO
[11] -1 0 0xe8000000 – 0xe9ffffff (0x2000000) MX(B)
[12] -1 0 0xe4000000 – 0xe5ffffff (0x2000000) MX(B)
[13] 0 0 0x000a0000 – 0x000affff (0x10000) MS
[14] 0 0 0x000b0000 – 0x000b7fff (0x8000) MS
[15] 0 0 0x000b8000 – 0x000bffff (0x8000) MS
[16] 0 0 0x0000d000 – 0x0000d0ff (0x100) IX
[17] -1 0 0x0000ffff – 0x0000ffff (0x1) IX
[18] -1 0 0x00000000 – 0x000000ff (0x100) IX
[19] -1 0 0x0000ec00 – 0x0000ec1f (0x20) IX
[20] -1 0 0x0000e800 – 0x0000e81f (0x20) IX
[21] -1 0 0x0000e400 – 0x0000e40f (0x10) IX
[22] -1 0 0x0000e000 – 0x0000e0ff (0x100) IX
[23] -1 0 0x0000d000 – 0x0000d0ff (0x100) IX(B)
[24] 0 0 0x000003b0 – 0x000003bb (0xc) IS(OprD)
[25] 0 0 0x000003c0 – 0x000003df (0x20) IS(OprD)
(==) TDFX(0): Write-combining range (0xe8000000,0x2000000)
(II) TDFX(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xcd00
(II) TDFX(0): Changing back offset from 0x009ff000 to 0x009fe000
(II) TDFX(0): Textures Memory 5.42 MB
(II) TDFX(0): Cursor Offset: [0x00000000,0x00001000)
(II) TDFX(0): Fifo Offset: [0x00001000, 0x00041000)
(II) TDFX(0): Front Buffer Offset: [0x00041000, 0x00493000)
(II) TDFX(0): Texture Offset: [0x00493000, 0x009FE000)
(II) TDFX(0): BackOffset: [0x009FE000, 0x00CFE000)
(II) TDFX(0): DepthOffset: [0x00CFF000, 0x00FFF000)
(II) TDFX(0): Minimum 338, Maximum 1279 lines of offscreen memory available
(EE) TDFX(0): [dri] tdfx DRI not supported in 32 bpp mode, disabling DRI.
(II) TDFX(0): [dri] To use DRI, invoke the server using 16 bpp
(-depth 15 or -depth 16).
(II) TDFX(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8×8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Offscreen Pixmaps
Driver provided NonTEGlyphRenderer replacement
Setting up tile and stipple cache:
32 128×128 slots
10 256×256 slots
(==) TDFX(0): Backing store disabled
(==) TDFX(0): Silken mouse enabled
(==) TDFX(0): Direct rendering disabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard „UHU-Keyboard” handled by legacy driver
(**) Option „Protocol” „ImPS/2”
(**) UHU-Mouse: Protocol: „ImPS/2”
(**) Option „CorePointer”
(**) UHU-Mouse: Core Pointer
(**) Option „Device” „/dev/gpmdata”
(**) Option „Buttons” „12”
(**) UHU-Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option „ZAxisMapping” „4 5 6 7”
(**) UHU-Mouse: ZAxisMapping: buttons 4, 5, 6 and 7
(**) UHU-Mouse: Buttons: 12
(II) XINPUT: Adding extended input device „UHU-Mouse” (type: MOUSE)
GetModeLine – scrn: 0 clock: 78800
GetModeLine – hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
(II) 3rd Button detected: disabling emulate3Button

kl233, mezei- és super userként is dobál. marhára belassul, kattan egyet a képernyõ, majd kidob. az elõbb is, amikor éppen a fájkezelõt nyitottam meg (fut még: XMMS; Galleon; Ximian Evolution).

Szúrd ide az /etc/X11=XF86Config-od

köszi srácok,

úgy néz ki, megoldódott a probléma: újratelepítettem, nagyobb swappel, az UHU vezérlõben pedig levettem a frissítést 60 Hz-re, a felbontást pedig a gyári 75 dpi-rõl 72-re, és remekül megy!
[align=right][snapback]86656[/snapback][/align]

HA az XF86Configban megadod a moncsi freki tartományait nem kell semmit sem állítgatnod csak a felbontást és a színmélységet!