Amennyire emlékszem, lehet OK-t nyomni.

De ami a legfontosabb, hogy telepítve legyen a kernel forráskódját tartalmazó csomag. Ha UHU-t használsz (valahogy az az érzésem, hogy igen ;-), akkor add ki a következõ parancsot rootként:

OFF
(Asszem ez a csomag neve. Amennyiben tévednék, akkor kérem a „nagyokat”, hogy ne röhögjenek, én is ilyen kezdõ voltam nem rég, de most már inkább segítek a nálam kezdõbbeknek, úgyis az a baja mindenkinek, hogy ilyen kérdésekre kell állandóan válaszolni, hát tessék, én válaszoltam.)
/OFF

Tehát ezek után elvileg mennie kell.

A Linux legyen veled!

NZs

láthatnánk a /var/log/nvidia-nforce-installer.log fájlod tartalmát?

más.
apt-get install kernel*
ezzel az összes kerneltartozékot leszeded

az „apt-get install kernel*”-ra ezt írja:

Reading Package Lists… Done
Building Dependency Tree… Done
Note, selecting kernel for regex ‘kernel*’
Note, selecting kernel-headers for regex ‘kernel*’
You might want to run `apt-get -f install’ to correct these:
The following packages have unmet dependencies:
dc-qt: Depends: dctc (>= 0.85.7) but it is not installable
Depends: xine-lib (>= 1~rc3a) but it is not installable
gimp: Depends: gimp-data (= 2.0.5-1) but it is not installable
Depends: aalib1 (>= 1.2) but it is not installable
Depends: libart-2.0-2 (>= 2.3.16) but it is not installable
Depends: libatk1.0-0 (>= 1.6.0) but it is not installable
Depends: libc6 (>= 2.3.2.ds1-4) but it is not installable
Depends: libexif10 but it is not installable
Depends: libexpat1 (>= 1.95.6) but it is not installable
Depends: libfontconfig1 (>= 2.2.1) but it is not installable
Depends: libfreetype6 (>= 2.1.5-1) but it is not installable
Depends: libgimp2.0 (>= 2.0.0) but it is not installable
Depends: libgimpprint1 (>= 4.2.7) but it is not installable
Depends: libglib2.0-0 (>= 2.4.6) but it is not installable
Depends: libgtk2.0-0 (>= 2.4.4) but it is not installable
Depends: libice6 but it is not installable or
xlibs (> 4.1.0) but it is not installable
Depends: libjpeg62 but it is not installable
Depends: liblcms1 (>= 1.08-1) but it is not installable
Depends: libmng1 (>= 1.0.3-1) but it is not installable
Depends: libpango1.0-0 (>= 1.4.1) but it is not installable
Depends: libpng12-0 (>= 1.2.5.0-4) but it is not installable
Depends: libsm6 but it is not installable or
xlibs (> 4.1.0) but it is not installable
Depends: libtiff4 but it is not installable
Depends: libwmf0.2-7 (>= 0.2.8) but it is not installable
Depends: libx11-6 but it is not installable or
xlibs (> 4.1.0) but it is not installable
Depends: libxmu6 but it is not installable or
xlibs (> 4.1.0) but it is not installable
Depends: libxpm4 but it is not installable or
xlibs (> 4.1.0) but it is not installable
Depends: libxt6 but it is not installable or
xlibs (> 4.1.0) but it is not installable
Depends: zlib1g (>= 1:1.2.1) but it is not installable
W: Couldn’t stat source package list ftp://ftp.uhulinux.hu ./ Packages (/var/state/apt/lists/ftp.uhulinux.hu_pub_uhu_1.1_._Packages) – stat (2 Nem létezõ fájl vagy könyvtár)
W: You may want to run apt-get update to correct these problems
E: Unmet dependencies. Try ‘apt-get -f install’ with no packages (or specify a solution).

nvidia-nforce-installer.log tartalma:

nforce-installer log file ‘/var/log/nvidia-nforce-installer.log’
creation time: Sat Dec 4 16:45:33 2004

Using: nvidia-installer ncurses user interface
-> Found package NVIDIA network driver for Linux-x86
-> Found package NVIDIA audio driver for Linux-x86
-> Please select packages for installation:
Selections:
NVIDIA network driver for Linux-x86 (1.0-10)
NVIDIA audio driver for Linux-x86 (1.0-1)
-> Starting install of NVIDIA network driver for Linux-x86
-> Checking for loaded module nvnet
-> Checking for loaded module forcedeth
-> License accepted.
-> Skipping check for conflicting rpms.
-> /proc/version is Linux version 2.4.24-7 (uhubuild@ojjektum) (gcc version
3.3.2) #1 SMP Tue Feb 24 17:22:48 CET 2004
-> No precompiled kernel interface was found to match your kernel; this means
that the installer will need to compile a new kernel interface.
-> Kernel source path: ‘/lib/modules/2.4.24-7/build’
-> Kernel output path: ‘/lib/modules/2.4.24-7/build’
-> Performing cc_version_check with CC=”cc”.
-> running command /bin/grep „^PATCHLEVEL =”
/lib/modules/2.4.24-7/build/Makefile | /usr/bin/cut -d ” ” -f 3
-> Kernel module filename is nvnet.o
Cleaning kernel module build directory.
executing: ‘cd ./nvnet; make clean’…
rm -f nvenet.o nvenetif.o nvnet.o *~ core
-> Building kernel module:
executing: ‘cd ./nvnet; make module SYSSRC=/lib/modules/2.4.24-7/build SYSOU
T=/lib/modules/2.4.24-7/build’…
cc -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-co
mmon -fomit-frame-pointer -I/lib/modules/2.4.24-7/build/include -O -mprefer
red-stack-boundary=2 -march=i686 -D__KERNEL__ -DMODULE -DLINUX -DDRIVERVE
R=”9999″ -DEXPORT_SYMTAB -DCONFIG_PM -I. -DMODVERSIONS -include /lib/mod
ules/2.4.24-7/build/include/linux/modversions.h -c -o nvenet.o nvenet.c
ld -r -o nvenetif.o nvenet.o
ld -r -o nvnet.o nvenetif.o nvenetlib.o
-> done.
-> Kernel module compilation complete.
-> Testing kernel module:
-> Backing up existing module /lib/modules/2.4.24-7/kernel/drivers/net/nvnet.o
to ./nvnet/nvnet.o.backup
-> Copying test module ./nvnet/nvnet.o to
/lib/modules/2.4.24-7/kernel/drivers/net/nvnet.o
ERROR: Unable to load the kernel module ‘nvnet.o’. This is most likely because
the kernel module was built using the wrong kernel source files. Please
make sure you have installed the kernel source files for your kernel; on
Red Hat Linux systems, for example, be sure you have the ‘kernel-source’
rpm installed. If you know the correct kernel source files are
installed, you may specify the kernel source path with the
‘–kernel-source-path’ commandline option.
-> Kernel module load error: /lib/modules/2.4.24-7/kernel/drivers/net/nvnet.o:
init_module: No such device
/lib/modules/2.4.24-7/kernel/drivers/net/nvnet.o: insmod
/lib/modules/2.4.24-7/kernel/drivers/net/nvnet.o failed
/lib/modules/2.4.24-7/kernel/drivers/net/nvnet.o: insmod nvnet failed
Hint: insmod errors can be caused by incorrect module parameters, including
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
-> Restoring backup /lib/modules/2.4.24-7/kernel/drivers/net/nvnet.o
-> Testing completed.
ERROR: Installation of the network driver has failed. Please see the file
‘/var/log/nvidia-nforce-installer.log’ for details. You may find
suggestions on fixing installation problems in the README available on
the Linux driver download page at http://www.nvidia.com.
-> Starting install of NVIDIA audio driver for Linux-x86
-> Checking for loaded module nvsound
-> Checking for loaded module nvaudio

Légyszi küldjön nekem vki egy „/etc/apt/sources.list”-et mert én egy kicsit átírtam és most nem mûkszik. (szerintem ez a baja)

Most jöttem rá, hogy még egy fontos lépés van (épp most raktam fel az UHU 1.2 bétát)

A hangkártyánál nem tudd fennálni ez a probléma, cseréli szépen magától mint a kisangyal.

A kernel forrás (kernel-source) hiányzik neki, úgy járj el, ahogy xcut leírta. Ha kész vagy, akkor a Vezérlõpultban a Kernelmodulok között a hangkártya címszó alatt keress egy nvsound drivert (nekem az oss alatt volt megtalálható) és nyomd meg a betöltés induláskor. Aztán restart. Nekem megy.

NZs