Mivel megtaláltam a programhoz azt a kapcsolót, hogy csak a hibákat írja ki, íme:

holdfeny:/home/moon# smartctl -l error /dev/hda
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 1
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It „wraps” after 49.710 days.

Error 1 occurred at disk power-on lifetime: 695 hours (28 days + 23 hours)
  When the command that caused the error occurred, the device was in an unknown state.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  — — — — — — —
  10 51 80 87 da a3 a0  Error: IDNF at LBA = 0x00a3da87 = 10738311

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC  Powered_Up_Time  Command/Feature_Name
  — — — — — — — — 

---

 

---

  ca 03 80 87 da a3 a0 00      00:07:45.696  WRITE DMA
  ca 03 80 07 da a3 e2 00      00:07:45.680  WRITE DMA
  ca 03 80 87 d9 a3 e2 00      00:07:45.680  WRITE DMA
  ca 03 80 07 d9 a3 e2 00      00:07:45.680  WRITE DMA
  ca 03 80 87 d8 a3 e2 00      00:07:45.664  WRITE DMA

holdfeny:/home/moon#