Köszönöm. Azért tettem fel két fórumra mert tapasztalotom szerint a több fórum egy kérdés több választ szül (mások aktívak a másik fórumokon) amibõl nagyobb valószínûséggel születik használható válasz.

Nem írtam át semmilyen conf file-t (windows alól jöttem, ott nem szokás).
A glxgears 3 darab másodpercenként egyet mozduló fogaskereket ad vissza (és a CPU 100% terhelés alatt nyög)

közben megtaláltam a logviewerben az x.log-ot, ott a következõt írja:

default setting Using config file: „/etc/X11/xorg.conf”
default setting ServerLayout „Default Layout”
from config file |–>Screen „Default Screen” (0)
from config file |  |–>Monitor „W19-1”
from config file |  |–>Device „ATI Technologies, Inc. RV280 [Radeon 9200]”
from config file |–>Input Device „Generic Keyboard”

kicsit lejebb:

information Primary Device is: PCI 01:00:0
information ATI:  Candidate „Device” section „ATI Technologies, Inc. RV280 [Radeon 9200]”.
warning RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
probed Chipset ATI Radeon 9200 5961 (AGP) found

még lejebb:

information Loading sub module „radeon”
information LoadModule: „radeon”
information Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
information Module radeon: vendor=”X.Org Foundation”
information compiled for 7.0.0, module version = 4.0.3
information Module class: X.Org Video Driver
information ABI class: X.Org Video Driver, version 0.8

sokkal lejebb:

information Setting vga for screen 0.
from config file RADEON(0): RADEONPreInit
information RADEON(0): MMIO registers at 0xd5000000
information RADEON(0): PCI bus 1 card 0 func 0
from config file RADEON(0): Depth 24, (–) framebuffer bpp 32
information RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
default setting RADEON(0): Default visual is TrueColor
information Loading sub module „vgahw”
information LoadModule: „vgahw”
information Loading /usr/lib/xorg/modules/libvgahw.so
information Module vgahw: vendor=”X.Org Foundation”
information compiled for 7.0.0, module version = 0.1.0
information ABI class: X.Org Video Driver, version 0.8
information RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
default setting RADEON(0): RGB weight 888
information RADEON(0): Using 8 bits per RGB (8 bit DAC)
information Loading sub module „int10”
information LoadModule: „int10”
information Reloading /usr/lib/xorg/modules/libint10.so
information RADEON(0): initializing int10
information RADEON(0): Primary V_BIOS segment is: 0xc000
probed RADEON(0): Chipset: „ATI Radeon 9200 5961 (AGP)” (ChipID = 0x5961)
probed RADEON(0): Linear framebuffer at 0xc0000000
information RADEON(0): AGP card detected
information drmOpenDevice: node name is /dev/dri/card0
information drmOpenDevice: open result is -1, (No such device or address)
information drmOpenDevice: open result is -1, (No such device or address)
information drmOpenDevice: Open failed
information drmOpenByBusid: Searching for BusID pci:0000:01:00.0
information drmOpenDevice: node name is /dev/dri/card0
information drmOpenDevice: open result is 6, (OK)
information drmOpenByBusid: drmOpenMinor returns 6
information drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
information RADEON(0): [dri] Found DRI library version 1.2.0 and kernel module version 1.24.0
information RADEON(0): AGP Fast Write disabled by default
information Loading sub module „shadowfb”
information LoadModule: „shadowfb”
information Loading /usr/lib/xorg/modules/libshadowfb.so
information Module shadowfb: vendor=”X.Org Foundation”
information compiled for 7.0.0, module version = 1.0.0
information ABI class: X.Org ANSI C Emulation, version 0.2
information RADEON(0): Page flipping disabled
information RADEON(0): Will try to use DMA for Xv image transfers
information RADEON(0): Generation 2 PCI interface, using max accessible memory
information RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
probed RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
information RADEON(0): Color tiling enabled by default
information Loading sub module „ddc”
information LoadModule: „ddc”
information Reloading /usr/lib/xorg/modules/libddc.so
information Loading sub module „i2c”
information LoadModule: „i2c”
information Reloading /usr/lib/xorg/modules/libi2c.so
information RADEON(0): I2C bus „DDC” initialized.
information RADEON(0): Legacy BIOS detected
information RADEON(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
information RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType–1, ConnectorType-2
information RADEON(0): I2C device „DDC:ddc2” registered at address 0xA0.
information RADEON(0): I2C device „DDC:ddc2” removed.
information RADEON(0): DDC Type: 2, Detected Type: 3
information RADEON(0): I2C device „DDC:ddc2” registered at address 0xA0.
information RADEON(0): I2C device „DDC:ddc2” removed.
information RADEON(0): I2C device „DDC:ddc2” registered at address 0xA0.
information RADEON(0): I2C device „DDC:ddc2” removed.
information RADEON(0): I2C device „DDC:ddc2” registered at address 0xA0.
information RADEON(0): I2C device „DDC:ddc2” removed.
information RADEON(0): DDC Type: 3, Detected Type: 0
information RADEON(0): EDID data from the display on port 1

---

information RADEON(0): Manufacturer: FUS  Model: 594  Serial#: 16843009
information RADEON(0): Year: 2005  Week: 36
information RADEON(0): EDID Version: 1.3
information RADEON(0): Digital Display Input
information RADEON(0): Max H-Image Size [cm]: horiz.: 43  vert.: 26
information RADEON(0): Gamma: 2.20
information RADEON(0): DPMS capabilities: Off; RGB/Color Display
information RADEON(0): First detailed timing is preferred mode
information RADEON(0): redX: 0.640 redY: 0.340  greenX: 0.295 greenY: 0.610
information RADEON(0): blueX: 0.145 blueY: 0.070  whiteX: 0.313 whiteY: 0.329
information RADEON(0): Supported VESA Video Modes:
information RADEON(0): 720×400@70Hz
information RADEON(0): 640×480@60Hz
information RADEON(0): 640×480@67Hz
information RADEON(0): 640×480@72Hz
information RADEON(0): 640×480@75Hz
information RADEON(0): 800×600@56Hz
information RADEON(0): 800×600@60Hz
information RADEON(0): 800×600@72Hz
information RADEON(0): 800×600@75Hz
information RADEON(0): 832×624@75Hz
information RADEON(0): 1024×768@60Hz
information RADEON(0): 1024×768@70Hz
information RADEON(0): 1024×768@75Hz
information RADEON(0): 1280×1024@75Hz
information RADEON(0): 1152×870@75Hz
information RADEON(0): Manufacturer’s mask: 0
information RADEON(0): Supported Future Video Modes:
information RADEON(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
information RADEON(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
information RADEON(0): #2: hsize: 1280  vsize 720  refresh: 75  vid: 53121
information RADEON(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
information RADEON(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
information RADEON(0): Supported additional Video Mode:
information RADEON(0): clock: 106.5 MHz  Image Size:  410 x 256 mm
information RADEON(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
information RADEON(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 942 v_border: 0
information RADEON(0): Serial No: YEGU008923
information RADEON(0): Ranges: V min: 56  V max: 75 Hz, H min: 31  H max: 83 kHz, PixClock max 140 MHz
information RADEON(0): Monitor name: W19-1
information RADEON(0):
information RADEON(0): Primary:
information Monitor  — TMDS
information Connector — DVI-I
information DAC Type  — TVDAC/ExtDAC
information TMDS Type — Internal
information DDC Type  — DVI_DDC
information RADEON(0): Secondary:
information Monitor  — NONE
information Connector — VGA
information DAC Type  — Primary
information TMDS Type — NONE
information DDC Type  — VGA_DDC
information RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=20000
warning RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
default setting RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
information RADEON(0): Validating modes on Primary head

---

information RADEON(0): DFP table revision: 4
information RADEON(0): Panel infos found from DDC detailed: 1440×900
information RADEON(0): Valid Mode from Detailed timing table: 1440×900
information RADEON(0): Valid Mode from standard timing table: 1152×864
information RADEON(0): Valid Mode from standard timing table: 1280×1024
information RADEON(0): Valid Mode from standard timing table: 1440×900
information RADEON(0): Valid Mode from established timing table: 1280×1024
information RADEON(0): Valid Mode from established timing table: 1024×768
information RADEON(0): Valid Mode from established timing table: 1024×768
information RADEON(0): Valid Mode from established timing table: 1024×768
information RADEON(0): Valid Mode from established timing table: 832×624
information RADEON(0): Valid Mode from established timing table: 800×600
information RADEON(0): Valid Mode from established timing table: 800×600
information RADEON(0): Valid Mode from established timing table: 800×600
information RADEON(0): Valid Mode from established timing table: 800×600
information RADEON(0): Valid Mode from established timing table: 640×480
information RADEON(0): Valid Mode from established timing table: 640×480
information RADEON(0): Valid Mode from established timing table: 640×480
information RADEON(0): Total of 16 mode(s) found.
information RADEON(0): Total number of valid DDC mode(s) found: 16
warning RADEON(0): Mode 1440×1440 is out of range.
warning RADEON(0): Valid modes must be between 320×200-1440×900
warning RADEON(0): Mode 1280×1024 is out of range.
warning RADEON(0): Valid modes must be between 320×200-1440×900
information RADEON(0): Valid mode using on-chip RMX: 1280×800
information RADEON(0): Valid mode using on-chip RMX: 1152×864
information RADEON(0): Valid mode using on-chip RMX: 1024×768
information RADEON(0): Valid mode using on-chip RMX: 832×624
information RADEON(0): Valid mode using on-chip RMX: 800×600
information RADEON(0): Valid mode using on-chip RMX: 720×400
information RADEON(0): Valid mode using on-chip RMX: 640×480
information RADEON(0): Total number of valid FP mode(s) found: 7
probed RADEON(0): Virtual size is 1280×1024 (pitch 1280)
from config file RADEON(0): *Mode „1280×800”: 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.4 Hz
information RADEON(0): Modeline „1280×800”  106.50  1280 1520 1672 1904  800 903 909 942
from config file RADEON(0): *Mode „1152×864”: 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.4 Hz
information RADEON(0): Modeline „1152×864”  106.50  1152 1520 1672 1904  864 903 909 942
from config file RADEON(0): *Mode „1024×768”: 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.4 Hz
information RADEON(0): Modeline „1024×768”  106.50  1024 1520 1672 1904  768 903 909 942
from config file RADEON(0): *Mode „832×624”: 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.4 Hz
information RADEON(0): Modeline „832×624”  106.50  832 1520 1672 1904  624 903 909 942
from config file RADEON(0): *Mode „800×600”: 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.4 Hz
information RADEON(0): Modeline „800×600”  106.50  800 1520 1672 1904  600 903 909 942
from config file RADEON(0): *Mode „720×400”: 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.4 Hz
information RADEON(0): Modeline „720×400”  106.50  720 1520 1672 1904  400 903 909 942
from config file RADEON(0): *Mode „640×480”: 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.4 Hz
information RADEON(0): Modeline „640×480”  106.50  640 1520 1672 1904  480 903 909 942
from config file RADEON(0):  Default mode „640×350”: 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.4 Hz
information RADEON(0): Modeline „640×350”  106.50  640 1520 1672 1904  350 903 909 942
from config file RADEON(0):  Default mode „640×400”: 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.4 Hz
information RADEON(0): Modeline „640×400”  106.50  640 1520 1672 1904  400 903 909 942
from config file RADEON(0):  Default mode „1280×768”: 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.4 Hz
information RADEON(0): Modeline „1280×768”  106.50  1280 1520 1672 1904  768 903 909 942
from config file RADEON(0):  Default mode „1152×768”: 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.4 Hz
information RADEON(0): Modeline „1152×768”  106.50  1152 1520 1672 1904  768 903 909 942
from config file RADEON(0):  Default mode „1440×900”: 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.4 Hz
information RADEON(0): Modeline „1440×900”  106.50  1440 1520 1672 1904  900 903 909 942
probed RADEON(0): Display dimensions: (430, 260) mm
probed RADEON(0): DPI set to (75, 100)

Ezek szerint az ATI drivert használja?

Ne keseríts el! Végre eljött az idõ, amikor normális grafikus felülete van a Linuxnak, normális beállítási lehetõségekkel erre azt írod, elõ a terminállal és induljon a 100 sorors config file-ok turkálása?

amit kértél:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type „man /etc/X11/xorg.conf” at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#  sudo dpkg-reconfigure -phigh xserver-xorg

Section „ServerLayout”
Identifier    „Default Layout”
Screen      0  „aticonfig-Screen[0]” 0 0
InputDevice    „Generic Keyboard”
InputDevice    „Configured Mouse”
InputDevice    „stylus” „SendCoreEvents”
InputDevice    „cursor” „SendCoreEvents”
InputDevice    „eraser” „SendCoreEvents”
EndSection

Section „Files”

# path to defoma fonts
FontPath    „/usr/share/X11/fonts/misc”
FontPath    „/usr/share/X11/fonts/cyrillic”
FontPath    „/usr/share/X11/fonts/100dpi/:unscaled”
FontPath    „/usr/share/X11/fonts/75dpi/:unscaled”
FontPath    „/usr/share/X11/fonts/Type1”
FontPath    „/usr/share/X11/fonts/100dpi”
FontPath    „/usr/share/X11/fonts/75dpi”
FontPath    „/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType”
EndSection

Section „Module”
Load  „i2c”
Load  „bitmap”
Load  „ddc”
Load  „dri”
Load  „extmod”
Load  „freetype”
Load  „glx”
Load  „int10”
Load  „type1”
Load  „vbe”
EndSection

Section „InputDevice”
Identifier  „Generic Keyboard”
Driver      „kbd”
Option     „CoreKeyboard”
Option     „XkbRules” „xorg”
Option     „XkbModel” „pc105”
Option     „XkbLayout” „hu”
EndSection

Section „InputDevice”
Identifier  „Configured Mouse”
Driver      „mouse”
Option     „CorePointer”
Option     „Device” „/dev/input/mice”
Option     „Protocol” „ExplorerPS/2”
Option     „ZAxisMapping” „4 5”
Option     „Emulate3Buttons” „true”
EndSection

Section „InputDevice”

                                                      # /dev/input/event
                                                      # for USB
Identifier  „stylus”
Driver      „wacom”
Option     „Device” „/dev/wacom”          # Change to
Option     „Type” „stylus”
Option     „ForceDevice” „ISDV4”              # Tablet PC ONLY
EndSection

Section „InputDevice”

                                                      # /dev/input/event
                                                      # for USB
Identifier  „eraser”
Driver      „wacom”
Option     „Device” „/dev/wacom”          # Change to
Option     „Type” „eraser”
Option     „ForceDevice” „ISDV4”              # Tablet PC ONLY
EndSection

Section „InputDevice”

                                                      # /dev/input/event
                                                      # for USB
Identifier  „cursor”
Driver      „wacom”
Option     „Device” „/dev/wacom”          # Change to
Option     „Type” „cursor”
Option     „ForceDevice” „ISDV4”              # Tablet PC ONLY
EndSection

Section „Monitor”
Identifier  „W19-1”
Option     „DPMS”
EndSection

Section „Monitor”
Identifier  „aticonfig-Monitor[0]”
Option     „VendorName” „ATI Proprietary Driver”
Option     „ModelName” „Generic Autodetecting Monitor”
Option     „DPMS” „true”
EndSection

Section „Device”
Identifier  „ATI Technologies, Inc. RV280 [Radeon 9200]”
Driver      „ati”
BusID      „PCI:1:0:0”
EndSection

Section „Device”
Identifier  „aticonfig-Device[0]”
Driver      „fglrx”
Option     „VideoOverlay” „on”
Option     „OpenGLOverlay” „off”
EndSection

Section „Screen”
Identifier „Default Screen”
Device    „ATI Technologies, Inc. RV280 [Radeon 9200]”
Monitor    „W19-1”
DefaultDepth    24
SubSection „Display”
Depth    1
Modes    „1440×1440” „1280×1024” „1280×800” „1152×864” „1024×768” „832×624” „800×600” „720×400” „640×480”
EndSubSection
SubSection „Display”
Depth    4
Modes    „1440×1440” „1280×1024” „1280×800” „1152×864” „1024×768” „832×624” „800×600” „720×400” „640×480”
EndSubSection
SubSection „Display”
Depth    8
Modes    „1440×1440” „1280×1024” „1280×800” „1152×864” „1024×768” „832×624” „800×600” „720×400” „640×480”
EndSubSection
SubSection „Display”
Depth    15
Modes    „1440×1440” „1280×1024” „1280×800” „1152×864” „1024×768” „832×624” „800×600” „720×400” „640×480”
EndSubSection
SubSection „Display”
Depth    16
Modes    „1440×1440” „1280×1024” „1280×800” „1152×864” „1024×768” „832×624” „800×600” „720×400” „640×480”
EndSubSection
SubSection „Display”
Depth    24
Modes    „1440×1440” „1280×1024” „1280×800” „1152×864” „1024×768” „832×624” „800×600” „720×400” „640×480”
EndSubSection
EndSection

Section „Screen”
Identifier „aticonfig-Screen[0]”
Device    „aticonfig-Device[0]”
Monitor    „aticonfig-Monitor[0]”
DefaultDepth    24
SubSection „Display”
Viewport  0 0
Depth    24
EndSubSection
EndSection

Section „DRI”
Mode        0666
EndSection

megpróbáltam, nincs különbség

Nem kell elfejeteni hogy a grafikus felületet újra kell indítani a módosítások után. 🙂

http://wiki.cchtml.com/index.php/Ubuntu_Dapper_Installation_Guide

Nekem megy.

Morzel