Igen.

Próbáld meg „nv”-vel vagy „vesa”-val egyelőre.
Ill. csatold be az „lspci” parancs kimenetét, az /etc/X11/xorg.conf-odat és /var/log/Xorg.0.log fájlt.

Ja, meg milyen monitorod van pontosan?

Xorg.conf:
[url url=http://file:///D:/freebsd/xorg.conf]file:///D:/freebsd/xorg.conf[/url]
Xorg.0.log:
[url url=http://file:///D:/freebsd/xorg.conf]http://file:///D:/freebsd/xorg.conf[/url][url url=http://file:///D:/freebsd/Xog.0.log]file:///D:/freebsd/Xog.0.log[/url]

Hogyha „nv”-vel vagy „vesa”-val próbálom akkor ugyanúgy lefagy a
„using config file : /etc/x11/xorg.conf” nál. Eddig „agp” nevezetű driverrel ment(csak bal fölső sarok)

Az lspci parancsra nekem unknown commandot ad vissza. Hol kéne futtatni?

A monitorom pedig m1448p gondolom ez neked nem mond semmit de nem vmi új darab. 800×600 a max…

Ez nem fog látszani

xogr.conf:

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the „Software”),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED „AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section — this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section „Module”

# This loads the DBE extension module.

    Load   „dbe” # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  „extmod”
Option    „omit xfree86-dga”  # don’t initialise the DGA extension
    EndSubSection

# This loads the font modules
    Load   „type1”
#    Load   „speedo”
    Load   „freetype”
#    Load   „xtt”

# This loads the GLX module
#    Load   „glx”
# This loads the DRI module
#    Load   „dri”

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section „Files”

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like „.txt” or „.db”).  There is normally
# no need to change the default.

    RgbPath    „/usr/X11R6/lib/X11/rgb”

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

    FontPath  „/usr/X11R6/lib/X11/fonts/misc/”
    FontPath  „/usr/X11R6/lib/X11/fonts/TTF/”
    FontPath  „/usr/X11R6/lib/X11/fonts/Type1/”
#    FontPath  „/usr/X11R6/lib/X11/fonts/CID/”
    FontPath  „/usr/X11R6/lib/X11/fonts/75dpi/”
    FontPath  „/usr/X11R6/lib/X11/fonts/100dpi/”
    FontPath  „/usr/X11R6/lib/X11/fonts/local/”
#    FontPath  „/usr/X11R6/lib/X11/fonts/Speedo/”
#    FontPath  „/usr/X11R6/lib/X11/fonts/TrueType/”
#    FontPath  „/usr/X11R6/lib/X11/fonts/freefont/”

# The module search path.  The default path is shown here.

#    ModulePath „/usr/X11R6/lib/modules”

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section „ServerFlags”

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option „NoTrapSignals”

# Uncomment this to disable the VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option „DontVTSwitch”

# Uncomment this to disable the server abort sequence
# This allows clients to receive this key event.

#    Option „DontZap”

# Uncomment this to disable the / mode switching
# sequences.  This allows clients to receive these key events.

#    Option „Dont Zoom”

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option „DisableVidModeExtension”

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option „AllowNonLocalXvidtune”

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option „DisableModInDev”

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option „AllowNonLocalModInDev”

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard’s InputDevice section
# **********************************************************************

Section „InputDevice”

    Identifier    „Keyboard1”
    Driver    „kbd”

# For most OSs the protocol can be omitted (it defaults to „Standard”).
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

#    Option „Protocol” „Xqueue”

    Option „AutoRepeat” „500 30”

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option    „Xleds” „1 2 3”

#    Option „LeftAlt” „Meta”
#    Option „RightAlt”    „ModeShift”

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option „XkbModel”    „pc105”
# If you have a US Microsoft Natural keyboard, you can use:
#    Option „XkbModel”    „microsoft”
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option „XkbLayout”  „de”
# or:
#    Option „XkbLayout”  „de”
#    Option „XkbVariant”  „nodeadkeys”
#
# If you’d like to switch the positions of your capslock and
# control keys, use:
#    Option „XkbOptions”  „ctrl:swapcaps”

# These are the default XKB settings for Xorg
#    Option „XkbRules”    „xorg”
#    Option „XkbModel”    „pc105”
#    Option „XkbLayout”  „us”
#    Option „XkbVariant”  „”
#    Option „XkbOptions”  „”

#    Option „XkbDisable”

    Option „XkbRules”    „xorg”
    Option „XkbModel”    „pc105”
    Option „XkbLayout”    „hu”

EndSection

# **********************************************************************
# Core Pointer’s InputDevice section
# **********************************************************************

Section „InputDevice”

# Identifier and driver

    Identifier    „Mouse1”
    Driver    „mouse”
    Option „Protocol”    „Auto”    # Auto detect
    Option „Device” „/dev/sysmouse”

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Option „Protocol”    „Xqueue”

# Mouse-speed setting for PS/2 mouse.

#    Option „Resolution”    „256”

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option „BaudRate”    „9600”
#    Option „SampleRate”    „150”

# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.  Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

    Option „ZAxisMapping”  „4 5 6 7”

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option „Emulate3Buttons”
#    Option „Emulate3Timeout”    „50”

# ChordMiddle is an option for some 3-button Logitech mice

#    Option „ChordMiddle”

EndSection

# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section „InputDevice”
#    Identifier  „Mouse2”
#    Driver „mouse”
#    Option „Protocol” „MouseMan”
#    Option „Device”   „/dev/mouse2”
# EndSection
#
# Section „InputDevice”
#    Identifier „spaceball”
#    Driver „magellan”
#    Option „Device”   „/dev/cua0”
# EndSection
#
# Section „InputDevice”
#    Identifier „spaceball2”
#    Driver „spaceorb”
#    Option „Device”   „/dev/cua0”
# EndSection
#
# Section „InputDevice”
#    Identifier „touchscreen0”
#    Driver „microtouch”
#    Option „Device”   „/dev/ttyS0”
#    Option „MinX” „1412”
#    Option „MaxX” „15184”
#    Option „MinY” „15372”
#    Option „MaxY” „1230”
#    Option „ScreenNumber”  „0”
#    Option „ReportingMode” „Scaled”
#    Option „ButtonNumber”  „1”
#    Option „SendCoreEvents”
# EndSection
#
# Section „InputDevice”
#    Identifier „touchscreen1”
#    Driver „elo2300”
#    Option „Device”   „/dev/ttyS0”
#    Option „MinX” „231”
#    Option „MaxX” „3868”
#    Option „MinY” „3858”
#    Option „MaxY” „272”
#    Option „ScreenNumber”  „0”
#    Option „ReportingMode” „Scaled”
#    Option „ButtonThreshold”   „17”
#    Option „ButtonNumber”  „1”
#    Option „SendCoreEvents”
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section „Monitor”

    Identifier  „m1448p”

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR’S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync  31.5 – 35.1

#    HorizSync    30-64     # multisync
#    HorizSync    31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync    15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR’S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-60

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section „Device”
    Identifier    „Standard VGA”
    VendorName    „Unknown”
    BoardName    „Unknown”

# The chipset line is optional in most cases.  It can be used to override
# the driver’s chipset detection, and should not normally be specified.

#    Chipset    „generic”

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver „vesa”
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn’t present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID „PCI:0:10:0”

#    VideoRam    256

#    Clocks    25.2 28.3

EndSection

# Device configured by xorgconfig:

Section „Device”
    Identifier  „TNT2”
    Driver „vesa”
    # unsupported card
    #VideoRam    32768
    # Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the „-screen”
# option.
Section „Screen”
    Identifier  „Screen 1”
    Device „TNT2”
    Monitor „m1448p”
    DefaultDepth 8

    Subsection „Display”
  Depth   8
  Modes   „1280×1024” „1024×768” „800×600” „640×480”
  ViewPort    0 0
    EndSubsection
    Subsection „Display”
  Depth   16
  Modes   „1280×1024” „1024×768” „800×600” „640×480”
  ViewPort    0 0
    EndSubsection
    Subsection „Display”
  Depth   24
  Modes   „1280×1024” „1024×768” „800×600” „640×480”
  ViewPort    0 0
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# „-layout” option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section „ServerLayout”

# The Identifier line must be present
    Identifier  „Simple Layout”

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen „Screen 1”

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include „CorePointer”, „CoreKeyboard” and
# „SendCoreEvents”.

    InputDevice „Mouse1” „CorePointer”
    InputDevice „Keyboard1” „CoreKeyboard”

EndSection

# Section „DRI”
#    Mode 0666
# EndSection

xorg.0.log 1.rész

X Window System Version 6.9.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: FreeBSD 6.2 i386 [ELF]
Current Operating System: FreeBSD Yee2.router 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP i386
Build Date: 16 October 2006
    Before reporting problems, check http://wiki.X.Org
    to make sure that you have the latest version.
Module Loader present
Markers: (–) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: „/var/log/Xorg.0.log”, Time: Wed Jun 20 16:50:41 2007
(==) Using config file: „/etc/X11/xorg.conf”
(==) ServerLayout „Simple Layout”
(**) |–>Screen „Screen 1” (0)
(**) |  |–>Monitor „m1448p”
(**) |  |–>Device „TNT2”
(**) |–>Input Device „Mouse1”
(**) |–>Input Device „Keyboard1”
(WW) `fonts.dir’ not found (or not valid) in „/usr/X11R6/lib/X11/fonts/local/”.
    Entry deleted from font path.
    (Run ‘mkfontdir’ on „/usr/X11R6/lib/X11/fonts/local/”).
(**) FontPath set to „/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/TTF/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/”
(**) RgbPath set to „/usr/X11R6/lib/X11/rgb”
(==) ModulePath set to „/usr/X11R6/lib/modules”
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.2
    X.Org Video Driver: 0.8
    X.Org XInput driver : 0.5
    X.Org Server Extension : 0.2
    X.Org Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: „bitmap”
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.so
(II) Module bitmap: vendor=”X.Org Foundation”
    compiled for 6.9.0, module version = 1.0.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: „pcidata”
(II) Loading /usr/X11R6/lib/modules/libpcidata.so
(II) Module pcidata: vendor=”X.Org Foundation”
    compiled for 6.9.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 0.8
(–) Using syscons driver with X support (version 2.0)
(–) using VT number 9

(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 1043,80e7 rev c4 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:04:0: chip 1106,0686 card 1043,80e7 rev 40 class 06,01,00 hdr 80
(II) PCI: 00:04:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:04:2: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:04:3: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:04:4: chip 1106,3057 card 0000,0000 rev 40 class 06,00,00 hdr 00
(II) PCI: 00:06:0: chip 127a,1025 card 127a,1025 rev 01 class 07,80,00 hdr 00
(II) PCI: 00:08:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 00:09:0: chip 1106,3038 card 1106,3038 rev 61 class 0c,03,00 hdr 80
(II) PCI: 00:09:1: chip 1106,3038 card 1106,3038 rev 61 class 0c,03,00 hdr 80
(II) PCI: 00:09:2: chip 1106,3104 card 1106,3104 rev 63 class 0c,03,20 hdr 80
(II) PCI: 00:0a:0: chip 13f6,0111 card 13f6,0111 rev 10 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,002c card 0000,0000 rev 15 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
    [0] -1    0    0x00000000 – 0x0000ffff (0x10000) IX
(II) Bus 0 non-prefetchable memory range:
    [0] -1    0    0x00000000 – 0xffffffff (0x0) MX
(II) Bus 0 prefetchable memory range:
    [0] -1    0    0x00000000 – 0xffffffff (0x0) MX
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
    [0] -1    0    0xf8000000 – 0xf9efffff (0x1f00000) MX
(II) Bus 1 prefetchable memory range:
    [0] -1    0    0xf9f00000 – 0xfbffffff (0x2100000) MX
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(–) PCI:*(1:0:0) nVidia Corporation NV6 [Vanta/Vanta LT] rev 21, Mem @ 0xf8000000/24, 0xfa000000/25, BIOS @ 0xf9ff0000/16
(II) Addressable bus resource ranges are
    [0] -1    0    0x00000000 – 0xffffffff (0x0) MX
    [1] -1    0    0x00000000 – 0x0000ffff (0x10000) IX
(II) OS-reported resource ranges:
    [0] -1    0    0xffe00000 – 0xffffffff (0x200000) MX(B)
    [1] -1    0    0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
    [2] -1    0    0x000f0000 – 0x000fffff (0x10000) MX
    [3] -1    0    0x000c0000 – 0x000effff (0x30000) MX
    [4] -1    0    0x00000000 – 0x0009ffff (0xa0000) MX
    [5] -1    0    0x0000ffff – 0x0000ffff (0x1) IX
    [6] -1    0    0x00000000 – 0x000000ff (0x100) IX
(II) PCI Memory resource overlap reduced 0xfc000000 from 0xffffffff to 0xfbffffff
(II) Active PCI resource ranges:
    [0] -1    0    0xf6800000 – 0xf6ffffff (0x800000) MXE
    [1] -1    0    0xf7000000 – 0xf7ffffff (0x1000000) MXE
    [2] -1    0    0xf7800000 – 0xf7ffffff (0x800000) MXE
    [3] -1    0    0xfc000000 – 0xfbffffff (0x0) MXEO
    [4] -1    0    0xf9ff0000 – 0xf9ffffff (0x10000) MX(B)
    [5] -1    0    0xfa000000 – 0xfbffffff (0x2000000) MX(B)
    [6] -1    0    0xf8000000 – 0xf8ffffff (0x1000000) MX(B)
    [7] -1    0    0x0000a400 – 0x0000a4ff (0x100) IXE
    [8] -1    0    0x0000a800 – 0x0000a8ff (0x100) IXE
    [9] -1    0    0x0000b000 – 0x0000b0ff (0x100) IXE
    [10] -1    0    0x0000b400 – 0x0000b4ff (0x100) IXE
    [11] -1    0    0x0000b800 – 0x0000b8ff (0x100) IXE
    [12] -1    0    0x0000d000 – 0x0000d0ff (0x100) IXE
    [13] -1    0    0x0000d400 – 0x0000d4ff (0x100) IXE
    [14] -1    0    0x0000d800 – 0x0000d8ff (0x100) IXE
(II) PCI Memory resource overlap reduced 0xf7000000 from 0xf7ffffff to 0xf77fffff
(II) Active PCI resource ranges after removing overlaps:
    [0] -1    0    0xf6800000 – 0xf6ffffff (0x800000) MXE
    [1] -1    0    0xf7000000 – 0xf77fffff (0x800000) MXE
    [2] -1    0    0xf7800000 – 0xf7ffffff (0x800000) MXE
    [3] -1    0    0xfc000000 – 0xfbffffff (0x0) MXEO
    [4] -1    0    0xf9ff0000 – 0xf9ffffff (0x10000) MX(B)
    [5] -1    0    0xfa000000 – 0xfbffffff (0x2000000) MX(B)
    [6] -1    0    0xf8000000 – 0xf8ffffff (0x1000000) MX(B)
    [7] -1    0    0x0000a400 – 0x0000a4ff (0x100) IXE
    [8] -1    0    0x0000a800 – 0x0000a8ff (0x100) IXE
    [9] -1    0    0x0000b000 – 0x0000b0ff (0x100) IXE
    [10] -1    0    0x0000b400 – 0x0000b4ff (0x100) IXE
    [11] -1    0    0x0000b800 – 0x0000b8ff (0x100) IXE
    [12] -1    0    0x0000d000 – 0x0000d0ff (0x100) IXE
    [13] -1    0    0x0000d400 – 0x0000d4ff (0x100) IXE
    [14] -1    0    0x0000d800 – 0x0000d8ff (0x100) IXE
(II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1    0    0xffe00000 – 0xffffffff (0x200000) MX(B)
    [1] -1    0    0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
    [2] -1    0    0x000f0000 – 0x000fffff (0x10000) MX
    [3] -1    0    0x000c0000 – 0x000effff (0x30000) MX
    [4] -1    0    0x00000000 – 0x0009ffff (0xa0000) MX
    [5] -1    0    0x0000ffff – 0x0000ffff (0x1) IX
    [6] -1    0    0x00000000 – 0x000000ff (0x100) IX
(II) All system resource ranges:
    [0] -1    0    0xffe00000 – 0xffffffff (0x200000) MX(B)
    [1] -1    0    0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
    [2] -1    0    0x000f0000 – 0x000fffff (0x10000) MX
    [3] -1    0    0x000c0000 – 0x000effff (0x30000) MX
    [4] -1    0    0x00000000 – 0x0009ffff (0xa0000) MX
    [5] -1    0    0xf6800000 – 0xf6ffffff (0x800000) MXE
    [6] -1    0    0xf7000000 – 0xf77fffff (0x800000) MXE
    [7] -1    0    0xf7800000 – 0xf7ffffff (0x800000) MXE
    [8] -1    0    0xfc000000 – 0xfbffffff (0x0) MXEO
    [9] -1    0    0xf9ff0000 – 0xf9ffffff (0x10000) MX(B)
    [10] -1    0    0xfa000000 – 0xfbffffff (0x2000000) MX(B)
    [11] -1    0    0xf8000000 – 0xf8ffffff (0x1000000) MX(B)
    [12] -1    0    0x0000ffff – 0x0000ffff (0x1) IX
    [13] -1    0    0x00000000 – 0x000000ff (0x100) IX
    [14] -1    0    0x0000a400 – 0x0000a4ff (0x100) IXE
    [15] -1    0    0x0000a800 – 0x0000a8ff (0x100) IXE
    [16] -1    0    0x0000b000 – 0x0000b0ff (0x100) IXE
    [17] -1    0    0x0000b400 – 0x0000b4ff (0x100) IXE
    [18] -1    0    0x0000b800 – 0x0000b8ff (0x100) IXE
    [19] -1    0    0x0000d000 – 0x0000d0ff (0x100) IXE
    [20] -1    0    0x0000d400 – 0x0000d4ff (0x100) IXE
    [21] -1    0    0x0000d800 – 0x0000d8ff (0x100) IXE
(II) LoadModule: „dbe”
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
(II) Module dbe: vendor=”X.Org Foundation”
    compiled for 6.9.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: „extmod”
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
(II) Module extmod: vendor=”X.Org Foundation”
    compiled for 6.9.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: „type1”
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.so
(II) Module type1: vendor=”X.Org Foundation”
    compiled for 6.9.0, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: „freetype”
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.so
(II) Module freetype: vendor=”X.Org Foundation & the After X-TT Project”
    compiled for 6.9.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: „vga”
(II) Loading /usr/X11R6/lib/modules/drivers/vga_drv.so
(II) Module vga: vendor=”X.Org Foundation”
    compiled for 6.9.0, module version = 4.0.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: „mouse”
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.so
(II) Module mouse: vendor=”X.Org Foundation”
    compiled for 6.9.0, module version = 1.0.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: „kbd”
(II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
(II) Module kbd: vendor=”X.Org Foundation”
    compiled for 6.9.0, module version = 1.0.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.5
(II) VGA: Generic VGA driver (version 4.0) for chipsets: generic
(II) Primary Device is: PCI 01:00:0
(–) Assigning device section with no busID to primary device
(–) Chipset generic found
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffe00000 – 0xffffffff (0x200000) MX(B)
    [1] -1    0    0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
    [2] -1    0    0x000f0000 – 0x000fffff (0x10000) MX
    [3] -1    0    0x000c0000 – 0x000effff (0x30000) MX
    [4] -1    0    0x00000000 – 0x0009ffff (0xa0000) MX
    [5] -1    0    0xf6800000 – 0xf6ffffff (0x800000) MXE
    [6] -1    0    0xf7000000 – 0xf77fffff (0x800000) MXE
    [7] -1    0    0xf7800000 – 0xf7ffffff (0x800000) MXE
    [8] -1    0    0xfc000000 – 0xfbffffff (0x0) MXEO
    [9] -1    0    0xf9ff0000 – 0xf9ffffff (0x10000) MX(B)
    [10] -1    0    0xfa000000 – 0xfbffffff (0x2000000) MX(B)
    [11] -1    0    0xf8000000 – 0xf8ffffff (0x1000000) MX(B)
    [12] -1    0    0x0000ffff – 0x0000ffff (0x1) IX
    [13] -1    0    0x00000000 – 0x000000ff (0x100) IX
    [14] -1    0    0x0000a400 – 0x0000a4ff (0x100) IXE
    [15] -1    0    0x0000a800 – 0x0000a8ff (0x100) IXE
    [16] -1    0    0x0000b000 – 0x0000b0ff (0x100) IXE
    [17] -1    0    0x0000b400 – 0x0000b4ff (0x100) IXE
    [18] -1    0    0x0000b800 – 0x0000b8ff (0x100) IXE
    [19] -1    0    0x0000d000 – 0x0000d0ff (0x100) IXE
    [20] -1    0    0x0000d400 – 0x0000d4ff (0x100) IXE
    [21] -1    0    0x0000d800 – 0x0000d8ff (0x100) IXE
(II) resource ranges after probing:
    [0] -1    0    0xffe00000 – 0xffffffff (0x200000) MX(B)
    [1] -1    0    0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
    [2] -1    0    0x000f0000 – 0x000fffff (0x10000) MX
    [3] -1    0    0x000c0000 – 0x000effff (0x30000) MX
    [4] -1    0    0x00000000 – 0x0009ffff (0xa0000) MX
    [5] -1    0    0xf6800000 – 0xf6ffffff (0x800000) MXE
    [6] -1    0    0xf7000000 – 0xf77fffff (0x800000) MXE
    [7] -1    0    0xf7800000 – 0xf7ffffff (0x800000) MXE
    [8] -1    0    0xfc000000 – 0xfbffffff (0x0) MXEO
    [9] -1    0    0xf9ff0000 – 0xf9ffffff (0x10000) MX(B)
    [10] -1    0    0xfa000000 – 0xfbffffff (0x2000000) MX(B)
    [11] -1    0    0xf8000000 – 0xf8ffffff (0x1000000) MX(B)
    [12] 0    0    0x000a0000 – 0x000affff (0x10000) MS
    [13] 0    0    0x000b0000 – 0x000b7fff (0x8000) MS
    [14] 0    0    0x000b8000 – 0x000bffff (0x8000) MS
    [15] -1    0    0x0000ffff – 0x0000ffff (0x1) IX
    [16] -1    0    0x00000000 – 0x000000ff (0x100) IX
    [17] -1    0    0x0000a400 – 0x0000a4ff (0x100) IXE
    [18] -1    0    0x0000a800 – 0x0000a8ff (0x100) IXE
    [19] -1    0    0x0000b000 – 0x0000b0ff (0x100) IXE
    [20] -1    0    0x0000b400 – 0x0000b4ff (0x100) IXE
    [21] -1    0    0x0000b800 – 0x0000b8ff (0x100) IXE
    [22] -1    0    0x0000d000 – 0x0000d0ff (0x100) IXE
    [23] -1    0    0x0000d400 – 0x0000d4ff (0x100) IXE
    [24] -1    0    0x0000d800 – 0x0000d8ff (0x100) IXE
    [25] 0    0    0x000003b0 – 0x000003bb (0xc) IS
    [26] 0    0    0x000003c0 – 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) Loading sub module „int10”
(II) LoadModule: „int10”
(II) Loading /usr/X11R6/lib/modules/libint10.so
(II) Module int10: vendor=”X.Org Foundation”
    compiled for 6.9.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 0.8
(II) VGA(0): initializing int10.
(==) VGA(0): Write-combining range (0xa0000,0x20000) was already clear
(==) VGA(0): Write-combining range (0xc0000,0x40000) was already clear
(II) VGA(0): Primary V_BIOS segment is: 0xc000
(==) VGA(0): Write-combining range (0x0,0x1000) was already clear
(==) VGA(0): Write-combining range (0x0,0x1000) was already clear
(**) VGA(0): Depth 8, (–) framebuffer bpp 8
(==) VGA(0): RGB weight 666
(==) VGA(0): Default visual is PseudoColor
(==) VGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) VGA(0): videoRam: 64 kBytes.
(II) Loading sub module „vgahw”
(II) LoadModule: „vgahw”
(II) Loading /usr/X11R6/lib/modules/libvgahw.so
(II) Module vgahw: vendor=”X.Org Foundation”
    compiled for 6.9.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 0.8
(II) VGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) VGA(0): Virtual size is 320×200 (pitch 320)
(**) VGA(0):  Built-in mode „Generic 320×200 default mode”: 12.6 MHz (scaled from 25.2 MHz), 31.5 kHz, 70.2 Hz (VScan)
(II) VGA(0): Modeline „Generic 320×200 default mode”  12.59  320 336 384 400  200 206 207 224 vscan 2 -hsync +vsync
(==) VGA(0): DPI set to (75, 75)
(II) Loading sub module „fb”
(II) LoadModule: „fb”
(II) Loading /usr/X11R6/lib/modules/libfb.so
(II) Module fb: vendor=”X.Org Foundation”
    compiled for 6.9.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.2
(II) do I need RAC?  No, I don’t.
(II) resource ranges after preInit:
    [0] 0    0    0xfa000000 – 0xfbffffff (0x2000000) MS
    [1] 0    0    0xf8000000 – 0xf8ffffff (0x1000000) MS
    [2] -1    0    0xffe00000 – 0xffffffff (0x200000) MX(B)
    [3] -1    0    0x00100000 – 0x3fffffff (0x3ff00000) MX