Sziasztok!

Az a probléma állt fel a minap, hogy az egyik raid tömbömben meghalt egy winyó, a spare device sikeresen a helyére állt. Sikerült egy új vinyót szerezni a rossz helyett. Szeretném azt megoldani, hogy a tömb szétszedése nélkül az új winyó, mint spare device szolgáljon. Tudtok ebben segíteni? Kellene a megfelelő mdadm parancs. Itt vannak a dmesg és az mdadm.conf megfelelő részei:

dmesg:

md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
md: md0 stopped.
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
md: bind
raid5: automatically using best checksumming function: VIS
  VIS   :  186.000 MB/sec
raid5: using function: VIS (186.000 MB/sec)
raid6: int64x1    127 MB/s
raid6: int64x2    187 MB/s
raid6: int64x4    223 MB/s
raid6: int64x8    161 MB/s
raid6: using algorithm int64x4 (223 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: device sda operational as raid disk 0
raid5: device sdn operational as raid disk 13
raid5: device sdm operational as raid disk 12
raid5: device sdr operational as raid disk 11
raid5: device sdk operational as raid disk 10
raid5: device sdj operational as raid disk 9
raid5: device sdi operational as raid disk 8
raid5: device sdh operational as raid disk 7
raid5: device sdg operational as raid disk 6
raid5: device sdf operational as raid disk 5
raid5: device sde operational as raid disk 4
raid5: device sdd operational as raid disk 3
raid5: device sdc operational as raid disk 2
raid5: device sdb operational as raid disk 1
raid5: allocated 29098kB for md0
raid5: raid level 5 set md0 active with 14 out of 14 devices, algorithm 2
RAID5 conf printout:
— rd:14 wd:14 fd:0
disk 0, o:1, dev:sda
disk 1, o:1, dev:sdb
disk 2, o:1, dev:sdc
disk 3, o:1, dev:sdd
disk 4, o:1, dev:sde
disk 5, o:1, dev:sdf
disk 6, o:1, dev:sdg
disk 7, o:1, dev:sdh
disk 8, o:1, dev:sdi
disk 9, o:1, dev:sdj
disk 10, o:1, dev:sdk
disk 11, o:1, dev:sdr
disk 12, o:1, dev:sdm
disk 13, o:1, dev:sdn

mdadm.conf:

# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#

# by default, scan all partitions (/proc/partitions) for MD superblocks.
# alternatively, specify devices to scan, using wildcards if desired.
DEVICE partitions

# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes

# automatically tag new arrays as belonging to the local system
HOMEHOST

# instruct the monitoring daemon where to send mail alerts
MAILADDR root

# definitions of existing MD arrays
ARRAY /dev/md0 level=raid5 metadata=1 num-devices=14 UUID=f74272ca29:df8e447b:b6463653:3589da name=cube0:0 auto=yes