Most meg nem mondom, de lehet hogy root jogok kellenek hozzá. Próbáld úgy, hogy

(Még mindig nem tudom, hogy a SuSE melyiket használja)

Ha ez sem vezet eredményre, akkor keress rá. Írd be ezt:

Ha kiad valami elérési utat, akkor használd azzal együtt. Például:

erdsiger köszi
pppoe-setup a jó
és pppoe-start amit kerestem.

asus:~ # pppoe-setup
Welcome to the Roaring Penguin PPPoE client setup.  First, I will run
some checks on your system to make sure the PPPoE client is installed
properly…

Looks good!  Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default pepito@invitel.hu): pepito@invitel.hu

INTERFACE

>>> Enter the Ethernet interface connected to the DSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where ‘n’ is a number.
(default eth0): eth0

MODEM TYPE

We will try to detect if your modem is compliant with RFC 2516
or not. 3COM’s 3CP4130 is *NOT* compliant, for instance.

Searching for a modem at interface eth0…
Found a RFC 2516 compliant modem, congratulations! 🙂

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped.  If you want the link to
stay up permanently, enter ‘no’ (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses.  You may have some problems with demand-activated links.
>>> Enter the demand value (default no): no

DNS

Please enter the IP address of your ISP’s primary DNS server.
If your ISP claims that ‘the server will provide DNS addresses’,
enter ‘server’ (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here:

PASSWORD

>>> Please enter your PPPoE password:
>>> Please re-enter your PPPoE password:

FIREWALLING

Please choose the firewall rules to use.  Note that these rules are
very basic.  You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security.  If you
are running any servers on your machine, you must choose ‘NONE’ and
set up firewalling yourself.  Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc.  If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:
0 – NONE: This script will not set any firewall rules.  You are responsible
          for ensuring the security of your machine.  You are STRONGLY
          recommended to use some kind of firewall rules.
1 – STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 – MASQUERADE: Appropriate for a machine acting as an Internet gateway
                for a LAN
>>> Choose a type of firewall (0-2): 1

** Summary of what you entered **

Ethernet Interface: eth0
User name:          pepito@invitel.hu
Activate-on-demand: No
DNS:                Do not adjust
Firewalling:        STANDALONE

>>> Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/ppp/pppoe.conf
Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets
  (But first backing it up to /etc/ppp/pap-secrets-bak)
  (But first backing it up to /etc/ppp/chap-secrets-bak)

Congratulations, it should be all set up!

Type ‘pppoe-start’ to bring up your PPPoE link and ‘pppoe-stop’ to bring
it down.  Type ‘pppoe-status’ to see the link status.
asus:~ # pppoe-start
… Connected!

Egész korrekt a segitség terminalba..suse 10.2 őt használok.