Kezdőlap › Fórumok › Videokártyák › Egyéb › ATI radeon 9600 xt
- This topic has 85 hozzászólás, 15 résztvevő, and was last updated 17 years, 10 months telt el by
wopi.
-
SzerzőBejegyzés
-
2007-07-23-23:01 #2122866
Section „Module”
Load „i2c”
Load „bitmap”
Load „ddc”
Load „dri”
Load „extmod”
Load „freetype”
Load „glx”
Load „int10”
Load „vbe”
Load „fglrx”
EndSectionEz nem kell. Xorg.log-gal többet érnénk. Meg hogy bent van-e a modul.
De csatold, ne beszúrd!2007-07-24-06:16 #2122867balev wrote:Meg hogy bent van-e a modul.
De csatold, ne beszúrd!Ezt kertem en is elobb, amugy meg halgass balevre mert nekem is o segitett 😛
A Xorg.log -ot ha nem tudnad a /var/log/Xorg0.log -talalod.2007-07-24-11:16 #2122868Hellósztok!
Én is próbálkozom az említett kártyával, csak nálam az a különbség, hogy mobiliti. De driver szempontjából ugyan azt adja, mint a normál 9600-nál. Szépen felment a driver, előtte minden függőséget megvizsgáltam, de a levégén, mikor /usr/X11R6/bin/aticonfig –initial parancsot kellett kiadni, Warning: Could not find configuration file Please copy configuration file template to /etc/X11 ezt a hibaüzenetet kaptam.
Már eleve az ia volt a problémám, hogy /usr/X11R6/bin/aticonfig nem itt volt, így rákerestem és /usr/bin/aticonfig itt találta meg.
https://a248.e.akamai.net/f/674/9206/0/www2.ati.com/drivers/linux/linux_8.39.4-inst.html Ez alapján telepítettem a kártyát.
Nekem nincs 7.04-em, csak egy 6.06-om.
Szeretném kipróbálni a berylt, meg egy két játékot, azért kéne a 3d támogatás.
Remélem, hogy tudtok segíteni. 🙂
Köszi előre is!
További szép napot!2007-07-24-11:40 #2122869„Please copy configuration file template to /etc/X11
ezt a hibaüzenetet kaptam.”
Talán hallgatni kéne rá, és megcsinálni a másolást.
2007-07-24-12:15 #2122870Mivel xorg.conf nélkül nem indul el az X, ezért ott kell lennie az /etc/X11-ben, csak valószínűleg más néven van. Így az aticonfignak meg kell adni a konfig fájl helyét is:
aticonfig –intitial –input=/etc/X11/config.neve
Máskor, ha nem találsz egy parancsot, akkor keresd a which-csel! (which aticonfig)
2007-07-24-14:40 #2122871Sziasztok!
Ebből látszik milyen kezdő vagyok. Hogy tudom becsatolni ide a fájlt?
Bacsi2! Amit irtál tökéletesen möködött elöszőr, bár akkor lett még elötte egy pár dolog probálkozva. aztán csináltam egy formázást ujra raktam az egészet és akkor már valamiért nem müködött amit irtál. Nem is értem miért.2007-07-24-15:14 #2122872na most elöről ujra rakom a ubuntut és akkor nem nyúlok semmihez és akkor megmutatom az infot
2007-07-24-16:54 #2122873Na sikerült ujra raknom az egészet.
És most van direct renderingem. Ilyenkor azért ki tudom tenni a kérdőjelet , hogy ez mitől lehet.
A xorgconf:/etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type „man xorg.conf” at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorgSection „Files”
Fontpath „/usr/share/fonts/X11/misc”
Fontpath „/usr/share/fonts/X11/cyrillic”
Fontpath „/usr/share/fonts/X11/100dpi/:unscaled”
Fontpath „/usr/share/fonts/X11/75dpi/:unscaled”
Fontpath „/usr/share/fonts/X11/Type1”
Fontpath „/usr/share/fonts/X11/100dpi”
Fontpath „/usr/share/fonts/X11/75dpi”
# path to defoma fonts
Fontpath „/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType”
EndSectionSection „Module”
Load „i2c”
Load „bitmap”
Load „ddc”
Load „dri”
Load „extmod”
Load „freetype”
Load „glx”
Load „int10”
Load „vbe”
EndSectionSection „InputDevice”
Identifier „Generic Keyboard”
Driver „kbd”
Option „CoreKeyboard”
Option „XkbRules” „xorg”
Option „XkbModel” „pc105”
Option „XkbLayout” „hu”
EndSectionSection „InputDevice”
Identifier „Configured Mouse”
Driver „mouse”
Option „CorePointer”
Option „Device” „/dev/input/mice”
Option „Protocol” „ImPS/2”
Option „ZAxisMapping” „4 5”
Option „Emulate3Buttons” „true”
EndSectionSection „InputDevice”
Driver „wacom”
Identifier „stylus”
Option „Device” „/dev/input/wacom”
Option „Type” „stylus”
Option „ForceDevice” „ISDV4″# Tablet PC ONLY
EndSectionSection „InputDevice”
Driver „wacom”
Identifier „eraser”
Option „Device” „/dev/input/wacom”
Option „Type” „eraser”
Option „ForceDevice” „ISDV4″# Tablet PC ONLY
EndSectionSection „InputDevice”
Driver „wacom”
Identifier „cursor”
Option „Device” „/dev/input/wacom”
Option „Type” „cursor”
Option „ForceDevice” „ISDV4″# Tablet PC ONLY
EndSectionSection „Device”
Identifier „ATI Technologies Inc RV350 AR [Radeon 9600]”
Driver „fglrx”
Busid „PCI:1:0:0”
EndSectionSection „Monitor”
Identifier „Generic Monitor”
Option „DPMS”
EndSectionSection „Screen”
Identifier „Default Screen”
Device „ATI Technologies Inc RV350 AR [Radeon 9600]”
Monitor „Generic Monitor”
Defaultdepth 24
SubSection „Display”
Depth 1
Modes „1280×1024” „1152×864” „1024×768” „832×624” „800×600” „720×400” „640×480”
EndSubSection
SubSection „Display”
Depth 4
Modes „1280×1024” „1152×864” „1024×768” „832×624” „800×600” „720×400” „640×480”
EndSubSection
SubSection „Display”
Depth 8
Modes „1280×1024” „1152×864” „1024×768” „832×624” „800×600” „720×400” „640×480”
EndSubSection
SubSection „Display”
Depth 15
Modes „1280×1024” „1152×864” „1024×768” „832×624” „800×600” „720×400” „640×480”
EndSubSection
SubSection „Display”
Depth 16
Modes „1280×1024” „1152×864” „1024×768” „832×624” „800×600” „720×400” „640×480”
EndSubSection
SubSection „Display”
Depth 24
Modes „1280×1024” „1152×864” „1024×768” „832×624” „800×600” „720×400” „640×480”
EndSubSection
EndSectionSection „ServerLayout”
Identifier „Default Layout”
screen „Default Screen”
Inputdevice „Generic Keyboard”
Inputdevice „Configured Mouse”
Inputdevice „stylus” „SendCoreEvents”
Inputdevice „cursor” „SendCoreEvents”
Inputdevice „eraser” „SendCoreEvents”
EndSectionSection „DRI”
Mode 0666
EndSection
Section „Extensions”
Option „Composite” „0”
EndSectionfglrxinfo:
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 XT
OpenGL version string: 2.0.6334 (8.34.8)glxinfo:
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
client glx vendor string: ATI
client glx version string: 1.3
client glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
GLX_ATI_pixel_format_float, GLX_ATI_render_texture
GLX version: 1.2
GLX extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_ARB_multisample
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9600 XT
OpenGL version string: 2.0.6334 (8.34.8)2007-07-24-17:31 #2122874akkor most jo minden ??
2007-07-25-08:11 #2122875Megfogadtam balev tanácsát, és megadtam a pontos helyet, amire ezt a hibaüzit adta ki.
Found fglrx primary device section
Nothing to do, terminating.
Mit tegyek? -
SzerzőBejegyzés
- Be kell jelentkezni a hozzászóláshoz.
legutóbbi hsz