nem megy az x – LinuxForum.hu

This topic has 18 hozzászólás, 7 résztvevő, and was last updated 20 years, 10 months telt el by emperor.

10 bejegyzés megtekintése - 1-10 / 19

1 2 →

Szerző

Bejegyzés
2004-09-22-18:16 #1974713
pointux
Felhasználó
A XF86Configban mi van?
2004-09-22-18:52 #1974714
emperor
Felhasználó
A XF86Configban mi van?
[align=right][snapback]85374[/snapback][/align]

Section „ServerLayout”
Identifier „XFree86 Configured”
Screen 0 „Screen0” 0 0
InputDevice „Mouse0” „CorePointer”
InputDevice „Keyboard0” „CoreKeyboard”
EndSection

Section „Files”
RgbPath „/usr/X11R6/lib/X11/rgb”
ModulePath „/usr/X11R6/lib/modules”
FontPath „/usr/X11R6/lib/X11/fonts/misc/”
FontPath „/usr/X11R6/lib/X11/fonts/Speedo/”
FontPath „/usr/X11R6/lib/X11/fonts/Type1/”
FontPath „/usr/X11R6/lib/X11/fonts/CID/”
FontPath „/usr/X11R6/lib/X11/fonts/75dpi/”
FontPath „/usr/X11R6/lib/X11/fonts/100dpi/”
EndSection

Section „Module”
Load „dbe”
Load „dri”
Load „extmod”
Load „glx”
Load „pex5”
Load „record”
Load „xie”
EndSection

Section „InputDevice”
Identifier „Keyboard0”
Driver „keyboard”
EndSection

Section „InputDevice”
Identifier „Mouse0”
Driver „mouse”
Option „Protocol” „auto”
Option „Device” „/dev/mouse”
EndSection

Section „Monitor”
Identifier „Monitor0”
VendorName „Monitor Vendor”
ModelName „Monitor Model”
EndSection

Section „Device”
### Available Driver options are:-
### Values: : integer, : float, : „True”/”False”,
### : „String”, : ” Hz/kHz/MHz”
### [arg]: arg optional
#Option „HWcursor” # []
#Option „NoAccel” # []
Identifier „Card0”
Driver „vmware”
VendorName „VMware”
BoardName „PCI SVGA (FIFO)”
BusID „PCI:0:15:0”
EndSection

Section „Screen”
Identifier „Screen0”
Device „Card0”
Monitor „Monitor0”
SubSection „Display”
Depth 1
EndSubSection
SubSection „Display”
Depth 4
EndSubSection
SubSection „Display”
Depth 8
EndSubSection
SubSection „Display”
Depth 15
EndSubSection
SubSection „Display”
Depth 16
EndSubSection
SubSection „Display”
Depth 24
EndSubSection
EndSection

remelem erre gondolsz 😉
2004-09-22-21:59 #1974715
fellow
Felhasználó
emperor:
imho nyomj egy ‘dpkg-reconfigure xserver-xfree86’ot, hogy helyese tolts ki;
instrukcok a debian_desktopban;
2004-09-22-22:26 #1974716
Bbt
Felhasználó
PEXExtensionInit: Couldn’t open default PEX font file Roman_M
This should not happen!
An unresolved function was called!
[align=right][snapback]85338[/snapback][/align]

Látod te is. keresi rajtad a fent megnevezett fontot. ami nincs fent. nem tudom melyikben van, talán ttf.
az /etc/X11/xf86config-4 file, mint nevébõl is látszik az x beállításait tartalmazza, rögtön az elején van a fontokra vonatkozó rész. postold légy ly kedves az ide vonatkozó részét a filenak, de EL
2004-09-22-22:51 #1974717
fellow
Felhasználó
fogalmam sincs mi ez a PEX extension, de nme hinnem hogy hudefontos lenne;
ugyhogy csinalj egy normalis konfigot a dpkgvel;
2004-09-22-23:05 #1974718
killall
Felhasználó
teddfel eles rendszernek 🙂
a vmware-ben csak gagyi beepitett hardverek vannak, talan azis lehet a baj. kommentezd ki a load pex5-ot az xf86config-4 -ben. szolj, hogy megy-e igy 🙂
2004-09-23-14:32 #1974719
emperor
Felhasználó
teddfel eles rendszernek 🙂
a vmware-ben csak gagyi beepitett hardverek vannak, talan azis lehet a baj. kommentezd ki a load pex5-ot az xf86config-4 -ben. szolj, hogy megy-e igy 🙂
[align=right][snapback]85466[/snapback][/align]

kiproxaltam ezt is, ennyit valtozott a log:

le version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: „bitmap”
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: „dbe”
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: „ddc”
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: „dri”
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module „drm”
(II) LoadModule: „drm”
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: „extmod”
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: „freetype”
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: „glx”
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module „GLcore”
(II) LoadModule: „GLcore”
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: „int10”
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: „record”
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: „speedo”
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Speedo
(II) LoadModule: „type1”
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: „vbe”
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: „xie”
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: „vmware”
(II) Loading /usr/X11R6/lib/modules/drivers/vmware_drv.o
(II) Module vmware: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 10.4.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: „mouse”
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) VMWARE: driver for VMware SVGA: vmware0405, vmware0710
(II) Primary Device is: PCI 00:0f:0
(–) VMware Guest X Server 10.4.0 – build=
(–) Assigning device section with no busID to primary device
(–) Chipset vmware0405 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] 0 0 0x000b8000 – 0x000bffff (0x8000) MX
[1] 0 0 0x000b0000 – 0x000b7fff (0x8000) MX
[2] 0 0 0x000a0000 – 0x000affff (0x10000) MX
[3] -1 0 0xffe00000 – 0xffffffff (0x200000) MX(B)
[4] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[5] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[6] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[7] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[8] -1 0 0xf8000000 – 0xf800001f (0x20) MX
[9] -1 0 0xf4000000 – 0xf7ffffff (0x4000000) MX
[10] -1 0 0xf9000000 – 0xf9ffffff (0x1000000) MX(B)
[11] -1 0 0xfa000000 – 0xfaffffff (0x1000000) MX(B)
[12] 0 0 0x000003c0 – 0x000003df (0x20) IX
[13] 0 0 0x000003b0 – 0x000003bb (0xc) IX
[14] -1 0 0x0000ffff – 0x0000ffff (0x1) IX
[15] -1 0 0x00000000 – 0x000000ff (0x100) IX
[16] -1 0 0x00001080 – 0x000010bf (0x40) IX
[17] -1 0 0x000010e0 – 0x000010ff (0x20) IX
[18] -1 0 0x000010c0 – 0x000010df (0x20) IX
[19] -1 0 0x00001060 – 0x0000107f (0x20) IX
[20] -1 0 0x00001410 – 0x0000141f (0x10) IX
[21] -1 0 0x00001400 – 0x0000140f (0x10) IX(B)
(II) resource ranges after probing:
[0] 0 0 0x000b8000 – 0x000bffff (0x8000) MX
[1] 0 0 0x000b0000 – 0x000b7fff (0x8000) MX
[2] 0 0 0x000a0000 – 0x000affff (0x10000) MX
[3] -1 0 0xffe00000 – 0xffffffff (0x200000) MX(B)
[4] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[5] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[6] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[7] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[8] -1 0 0xf8000000 – 0xf800001f (0x20) MX
[9] -1 0 0xf4000000 – 0xf7ffffff (0x4000000) MX
[10] -1 0 0xf9000000 – 0xf9ffffff (0x1000000) MX(B)
[11] -1 0 0xfa000000 – 0xfaffffff (0x1000000) MX(B)
[12] 0 0 0x000003c0 – 0x000003df (0x20) IX
[13] 0 0 0x000003b0 – 0x000003bb (0xc) IX
[14] -1 0 0x0000ffff – 0x0000ffff (0x1) IX
[15] -1 0 0x00000000 – 0x000000ff (0x100) IX
[16] -1 0 0x00001080 – 0x000010bf (0x40) IX
[17] -1 0 0x000010e0 – 0x000010ff (0x20) IX
[18] -1 0 0x000010c0 – 0x000010df (0x20) IX
[19] -1 0 0x00001060 – 0x0000107f (0x20) IX
[20] -1 0 0x00001410 – 0x0000141f (0x10) IX
[21] -1 0 0x00001400 – 0x0000140f (0x10) IX(B)
(II) Setting vga for screen 0.
(–) VMWARE(0): VMware SVGA regs at (0x1400, 0x1401)
(II) Loading sub module „vgahw”
(II) LoadModule: „vgahw”
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(–) VMWARE(0): depth: 24
(–) VMWARE(0): w.red: 8
(–) VMWARE(0): w.grn: 8
(–) VMWARE(0): w.blu: 8
(–) VMWARE(0): bpp: 32
(–) VMWARE(0): vis: 4
(–) VMWARE(0): vram: 16777216
(–) VMWARE(0): pbase: 0xfa000000
(–) VMWARE(0): mwidt: 2360
(–) VMWARE(0): mheig: 1770
(–) VMWARE(0): caps: 0x00003FF3
(**) VMWARE(0): Depth 24, (–) framebuffer bpp 32
(==) VMWARE(0): RGB weight 888
(==) VMWARE(0): Default visual is TrueColor
(==) VMWARE(0): Using HW cursor
(==) VMWARE(0): Using gamma correction (1.0, 1.0, 1.0)
(II) VMWARE(0): Generic Monitor: Using hsync range of 28.00-50.00 kHz
(II) VMWARE(0): Generic Monitor: Using vrefresh range of 43.00-75.00 Hz
(II) VMWARE(0): Clock range: 0.00 to 400000.00 MHz
(II) VMWARE(0): Not using default mode „640×350” (vrefresh out of range)
(II) VMWARE(0): Not using default mode „640×400” (vrefresh out of range)
(II) VMWARE(0): Not using default mode „720×400” (vrefresh out of range)
(II) VMWARE(0): Not using default mode „640×480” (vrefresh out of range)
(II) VMWARE(0): Not using default mode „800×600” (hsync out of range)
(II) VMWARE(0): Not using default mode „1024×768” (bad mode clock/interlace/doublescan)
(II) VMWARE(0): Not using default mode „1024×768” (hsync out of range)
(II) VMWARE(0): Not using default mode „1024×768” (hsync out of range)
(II) VMWARE(0): Not using default mode „1024×768” (hsync out of range)
(II) VMWARE(0): Not using default mode „1152×864” (hsync out of range)
(II) VMWARE(0): Not using default mode „1280×960” (hsync out of range)
(II) VMWARE(0): Not using default mode „1280×960” (hsync out of range)
(II) VMWARE(0): Not using default mode „1280×1024” (hsync out of range)
(II) VMWARE(0): Not using default mode „1280×1024” (hsync out of range)
(II) VMWARE(0): Not using default mode „1280×1024” (hsync out of range)
(II) VMWARE(0): Not using default mode „1600×1200” (hsync out of range)
(II) VMWARE(0): Not using default mode „1600×1200” (hsync out of range)
(II) VMWARE(0): Not using default mode „1600×1200” (hsync out of range)
(II) VMWARE(0): Not using default mode „1600×1200” (hsync out of range)
(II) VMWARE(0): Not using default mode „1600×1200” (hsync out of range)
(II) VMWARE(0): Not using default mode „1792×1344” (hsync out of range)
(II) VMWARE(0): Not using default mode „1792×1344” (hsync out of range)
(II) VMWARE(0): Not using default mode „1856×1392” (hsync out of range)
(II) VMWARE(0): Not using default mode „1856×1392” (hsync out of range)
(II) VMWARE(0): Not using default mode „1920×1440” (hsync out of range)
(II) VMWARE(0): Not using default mode „1920×1440” (hsync out of range)
(II) VMWARE(0): Not using default mode „1400×1050” (hsync out of range)
(II) VMWARE(0): Not using default mode „1400×1050” (hsync out of range)
(–) VMWARE(0): Virtual size is 1024×768 (pitch 1024)
(**) VMWARE(0): Default mode „1024×768”: 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) VMWARE(0): Modeline „1024×768” 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
(**) VMWARE(0): Default mode „800×600”: 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) VMWARE(0): Modeline „800×600” 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) VMWARE(0): Default mode „640×480”: 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) VMWARE(0): Modeline „640×480” 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(++) VMWARE(0): DPI set to (100, 100)
(II) Loading sub module „fb”
(II) LoadModule: „fb”
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module „xaa”
(II) LoadModule: „xaa”
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor=”The XFree86 Project”
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
Symbol mfbQueryBestSize from module /usr/X11R6/lib/modules/drivers/vmware_drv.o is unresolved!
(–) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don’t.
(II) resource ranges after preInit:
[0] 0 0 0x000b8000 – 0x000bffff (0x8000) MX
[1] 0 0 0x000b0000 – 0x000b7fff (0x8000) MX
[2] 0 0 0x000a0000 – 0x000affff (0x10000) MX
[3] -1 0 0xffe00000 – 0xffffffff (0x200000) MX(B)
[4] -1 0 0x00100000 – 0x3fffffff (0x3ff00000) MXE(B)
[5] -1 0 0x000f0000 – 0x000fffff (0x10000) MX
[6] -1 0 0x000c0000 – 0x000effff (0x30000) MX
[7] -1 0 0x00000000 – 0x0009ffff (0xa0000) MX
[8] -1 0 0xf8000000 – 0xf800001f (0x20) MX
[9] -1 0 0xf4000000 – 0xf7ffffff (0x4000000) MX
[10] -1 0 0xf9000000 – 0xf9ffffff (0x1000000) MX(B)
[11] -1 0 0xfa000000 – 0xfaffffff (0x1000000) MX(B)
[12] 0 0 0x000003c0 – 0x000003df (0x20) IX
[13] 0 0 0x000003b0 – 0x000003bb (0xc) IX
[14] -1 0 0x0000ffff – 0x0000ffff (0x1) IX
[15] -1 0 0x00000000 – 0x000000ff (0x100) IX
[16] -1 0 0x00001080 – 0x000010bf (0x40) IX
[17] -1 0 0x000010e0 – 0x000010ff (0x20) IX
[18] -1 0 0x000010c0 – 0x000010df (0x20) IX
[19] -1 0 0x00001060 – 0x0000107f (0x20) IX
[20] -1 0 0x00001410 – 0x0000141f (0x10) IX
[21] -1 0 0x00001400 – 0x0000140f (0x10) IX(B)
(WW) VMWARE(0): Failed to set up write-combining range (0xfa000000,0x1000000)
(WW) VMWARE(0): Option „UseFBDev” is not used
(WW) VMWARE(0): Option „DPMS” is not used
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER

This should not happen!
An unresolved function was called!

Fatal server error:

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file „/var/log/XFree86.0.log”.
Please report problems to submit@bugs.debian.org.
2004-09-23-14:48 #1974720
killall
Felhasználó
a use fbdev-et kommentezd ki.
2004-09-23-15:00 #1974721
emperor
Felhasználó
a use fbdev-et kommentezd ki.
[align=right][snapback]85617[/snapback][/align]

ugyan az a helyzet… 🙁
2004-09-23-16:00 #1974722
killall
Felhasználó
passz akkor….
nyilvan a vmware miatt van a dolog. tedd fel elesben.
Szerző

Bejegyzés

10 bejegyzés megtekintése - 1-10 / 19

1 2 →

Be kell jelentkezni a hozzászóláshoz.