kelemengabor:
„Csudát nincs. Ha belépsz pl. gnome-ba, mit látsz az asztalon?

modprobe nvidia -ra:

Warning: loading /lib/modules/2.4.20-17.1/kernel/drivers/video/nvidia.o will taint the kernel: non-GPL license – NVIDIA
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Module nvidia loaded, with warnings

nv_check.sh-ra:
végigmegy, megtalálja a XF86Config-ot, nvidiat is, a sorok kikomentezve (dri …stb)
csak a végén a 3d-nél áll meg

ha az nvidia van beírva a XF86Conf-ba, akkor nem tõltödik az X, kernel modul initializálása nem sikerült

Egyetlen mentségünk van: az eredetiben is meglehetõsen következetlenül keverik a foldert és a directoryt, vmi megfejthetetlen logika szerint. (talán, hogy aki megszokta se tévedjen el?)

Szerintem meg egyszerûen csak szinonímáknak tekinthetõk. A szóismétlést meg ugye inkább kerülnénk.

Hello fellow!

nv_check.sh:
Welcome to the NVidia Driver Installation Checker.
This shell script is meant to help you debug your installation
of the beta NVidia Linux drivers. It is not 100% foolproof.
In particular, you will definitely want to make sure you have
the correct options in your XF86Config to make X work properly.
This script cannot debug your X setup. That being said, it
should prove useful if are having problems with the drivers and
want to check the validity of your driver install.

At no time will this script EVER make changes to your system.
It is simply a diagnostic tool – fixes of any kind will have to
come from you.

Press enter to continue…
OK, the first thing we need to do is make sure your XF86Config file
is set up correctly. In order to do this, I’m first going to try
and find where this file might be…
checking /usr/X11R6/lib/X11/XF86Config…
not found
checking /usr/X11R6/etc/X11/XF86Config…
not found
checking /etc/XF86Config…
not found
checking /etc/X11/XF86Config…
found
checking /etc/X11/XF86Config-4…
not found
I’m going to be doing my checking using /etc/X11/XF86Config. If this is not
actually your X config, then quit this script with Ctrl-C, remove
or rename the file, then run this script again.
Press enter to continue
I’m going to check your XF86Config file for the following things:
1) Loading the GLcore and glx modules
2) Specifying the nvidia driver instead of nv

Checking for the Load glx statement…
Load „glx”
It seems to be intact. Now lets see if you’re loading the correct
video driver…
Driver „nvidia”
Everything seems fine in your X config file. This is not 100%
guaranteed to be accurate, but lets continue anyway (press enter)…
The next step involves making sure you have the proper files in
the right places, and that the kernel module loaded correctly.
Press enter to begin the test.
First lets make sure you don’t have the old modules still present
by mistake…
Checking /usr/X11R6/lib/modules/extensions/libglx.a…
Checking /usr/X11R6/lib/modules/extensions/libGLcore.a…
You don’t appear to have any conflicting older drivers. Now lets check
if the new driver files are in place…
Checking /usr/X11R6/lib/modules/drivers/nvidia_drv.o…
Checking /usr/X11R6/lib/modules/extensions/libglx.so…
Checking /usr/lib/libGL.so…
libGLcore.so.1 =] /usr/lib/libGLcore.so.1 (0x4006d000)
Checking /usr/lib/libGLcore.so.1…
All the files seem to exist. Now I’m going to see if your kernel
module is loaded correctly…
nvidia 1965216 0 (autoclean)
The kernel device /dev/nvidia1 does not exist, is not a device,
or does not have the proper permissions set. This dev entry should
have been created when you created the kernel module. If you
compiled the module by hand, you may have to create this device
manually (major number 195, minor number 1). After this is done,
please run this script again.

modules.conf:
# /etc/modules.conf

# modprobe nem tudja magától:
alias net-pf-10 ipv6
alias char-major-195 NVdriver

# ezeket még rendezni kéne:
# alias gen-md raid0
alias gen-md null
# alias /dev/joysticks joystick
alias /dev/joysticks null

# modules.devfs-bõl hiányzik:
alias /dev/input/mice mousedev
alias /dev/input input

alias /dev/parellel lp
alias /dev/par? /dev/parellel

alias /dev/usblp? printer
alias /dev/usb/lp? printer
alias /dev/usb/usblp? printer

# Az modulbetöltés koncepció miatt, a kevesebb warning érdekében:
# – hangkártyák
alias snd-card-0 null
alias snd-card-1 null
alias snd-card-2 null
alias snd-card-3 null
alias snd-card-4 null
alias snd-card-5 null
alias snd-card-6 null
alias snd-card-7 null
# – SCSI
alias scsi_hostadapter null
alias /dev/nvidia* nvidia

köszi elöre is!

bt:
„# modprobe nem tudja magától:
alias net-pf-10 ipv6
alias char-major-195 NVdriver”
itt a hiba: NVdriver meg vmikor ezer eve volt, ma mar „nvidia” a kernel modul neve; ird at;

rushmoon:
„A plug&pray ferdítést gondolom ismeritek (~dugd be és imádkozz, hogy elindul a win) „
persze, alapvetes;
az ujabb winekben meg mar „magatol mukodik”; ez mar tenyleg lmao!
sot, ha pld win5.0 vmje hibazik, akkor van egy szep bsod; na, ott olyanokat ir, hogy biosban kapcsold le a „memoria arnyekolast” es a „memoria gyorstarazast”; szegeny atlagbela, meg bemegy a biosba es olyat lat, hogy „xxxxx-yyyyy shadow” meg „zzz cache” 😉

„Ha jól emlékszem nem csak a win95 épült dosra, de a 98 és az me is még..”
naja, innovacio;

„Amúgy nekem semmi bajom a folder/mappa szavakkal…”
tessek megkerdezni kovit az amigas idokrol; pld ott a „dialog box” (tudjatok yes/no/cancel) ugy hivtak: _requester_; nem sokkal egyertelmubb, hogy mirol van szo? (persze nem „felhasznalobarat”, mert atlagbela le se tudna irni)
mondjuk azt a gepet meg igazi programozok csinaltak; (vesd ossze: x86 architektura, bios, msdos memoria kezelese, fat)