Sziasztok. Az lenne a kérdésem hogy mennyire normális dolog-e az, ha az X mondjuk 30 indításból 1szer ultra alacsony felbontáson indul és, és reboot után rendbejön? xorgconfig -al gyártottam vele config-et, és az http://xtiming.sf.net scripttel gyártottam egy frankó modeline -t is.
Config:

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the „Software”),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED „AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section — this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section „Module”

# This loads the DBE extension module.

Load „dbe” # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection „extmod”
Option „omit xfree86-dga” # don’t initialise the DGA extension
EndSubSection

# This loads the font modules
Load „type1”
# Load „speedo”
Load „freetype”
# Load „xtt”

# This loads the GLX module
Load „glx”
# This loads the DRI module
# Load „dri”

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section „Files”

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like „.txt” or „.db”). There is normally
# no need to change the default.

RgbPath „/usr/X11R6/lib/X11/rgb”

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
#

# FontPath „/usr/share/fonts/CID/”
# FontPath „/usr/share/fonts/Speedo/”
# FontPath „/usr/share/fonts/TrueType/”
# FontPath „/usr/share/fonts/freefont/”

# The module search path. The default path is shown here.

# ModulePath „/usr/X11R6/lib/modules”

FontPath „/usr/share/fonts/misc”
FontPath „/usr/share/fonts/TTF”
FontPath „/usr/share/fonts/Type1”
FontPath „/usr/share/fonts/75dpi”
FontPath „/usr/share/fonts/100dpi”
FontPath „/usr/share/fonts/local”
FontPath „/usr/local/share/fonts”
FontPath „/usr/share/fonts”
FontPath „/usr/X11R6/lib/X11/fonts”
FontPath „/usr/share/fonts/cyrillic”
FontPath „/usr/share/fonts/default”
FontPath „/usr/share/fonts/ukr”
FontPath „/usr/X11R6/lib/X11/fonts/TTF”
FontPath „/usr/local/share/fonts/TTF”
EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section „ServerFlags”

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option „NoTrapSignals”

# Uncomment this to disable the VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.

# Option „DontVTSwitch”

# Uncomment this to disable the server abort sequence
# This allows clients to receive this key event.

# Option „DontZap”

# Uncomment this to disable the / mode switching
# sequences. This allows clients to receive these key events.

# Option „Dont Zoom”

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option „DisableVidModeExtension”

# Uncomment this to enable the use of a non-local xvidtune client.

# Option „AllowNonLocalXvidtune”

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option „DisableModInDev”

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option „AllowNonLocalModInDev”

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard’s InputDevice section
# **********************************************************************

Section „InputDevice”

Identifier „Keyboard1”
Driver „kbd”

# For most OSs the protocol can be omitted (it defaults to „Standard”).
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option „Protocol” „Xqueue”

Option „AutoRepeat” „500 30”

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option „Xleds” „1 2 3”

# Option „LeftAlt” „Meta”
# Option „RightAlt” „ModeShift”

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option „XkbModel” „pc105”
# If you have a US Microsoft Natural keyboard, you can use:
# Option „XkbModel” „microsoft”
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option „XkbLayout” „de”
# or:
# Option „XkbLayout” „de”
# Option „XkbVariant” „nodeadkeys”
#
# If you’d like to switch the positions of your capslock and
# control keys, use:
# Option „XkbOptions” „ctrl:swapcaps”

# These are the default XKB settings for Xorg
# Option „XkbRules” „xorg”
# Option „XkbModel” „pc105”
# Option „XkbLayout” „us”
# Option „XkbVariant” „”
# Option „XkbOptions” „”

# Option „XkbDisable”

Option „XkbRules” „xorg”
Option „XkbModel” „pc104”
Option „XkbLayout” „hu”

EndSection

# **********************************************************************
# Core Pointer’s InputDevice section
# **********************************************************************

Section „InputDevice”

# Identifier and driver

Identifier „Mouse1”
Driver „mouse”
Option „Protocol” „ImPS/2”
Option „Device” „/dev/psaux”

# Mouse-speed setting for PS/2 mouse.

# Option „Resolution” „256”

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option „Protocol” „Xqueue”

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option „BaudRate” „9600”
# Option „SampleRate” „150”

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

Option „Emulate3Buttons”
# Option „Emulate3Timeout” „50”

# ChordMiddle is an option for some 3-button Logitech mice

# Option „ChordMiddle”

Option „ZAxisMapping” „4 5”
Option „Buttons” „5”

EndSection

# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section „InputDevice”
# Identifier „Mouse2”
# Driver „mouse”
# Option „Protocol” „MouseMan”
# Option „Device” „/dev/mouse2”
# EndSection
#
# Section „InputDevice”
# Identifier „spaceball”
# Driver „magellan”
# Option „Device” „/dev/cua0”
# EndSection
#
# Section „InputDevice”
# Identifier „spaceball2”
# Driver „spaceorb”
# Option „Device” „/dev/cua0”
# EndSection
#
# Section „InputDevice”
# Identifier „touchscreen0”
# Driver „microtouch”
# Option „Device” „/dev/ttyS0”
# Option „MinX” „1412”
# Option „MaxX” „15184”
# Option „MinY” „15372”
# Option „MaxY” „1230”
# Option „ScreenNumber” „0”
# Option „ReportingMode” „Scaled”
# Option „ButtonNumber” „1”
# Option „SendCoreEvents”
# EndSection
#
# Section „InputDevice”
# Identifier „touchscreen1”
# Driver „elo2300”
# Option „Device” „/dev/ttyS0”
# Option „MinX” „231”
# Option „MaxX” „3868”
# Option „MinY” „3858”
# Option „MaxY” „272”
# Option „ScreenNumber” „0”
# Option „ReportingMode” „Scaled”
# Option „ButtonThreshold” „17”
# Option „ButtonNumber” „1”
# Option „SendCoreEvents”
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section „Monitor”

Identifier „My Monitor”
Modeline „1024×768@85” 100.94 1024 1056 1432 1464 768 782 793 807
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR’S
# USER MANUAL FOR THE CORRECT NUMBERS.

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR’S
# USER MANUAL FOR THE CORRECT NUMBERS.

EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section „Device”
Identifier „Standard VGA”
VendorName „Unknown”
BoardName „Unknown”

# The chipset line is optional in most cases. It can be used to override
# the driver’s chipset detection, and should not normally be specified.

# Chipset „generic”

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver „vga”
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn’t present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID „PCI:0:10:0”

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xorgconfig:

Section „Device”
Identifier „** NVIDIA (generic) [nv]”
Driver „nvidia”
#VideoRam 65536
# Insert Clocks lines here if appropriate
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the „-screen”
# option.
Section „Screen”
Identifier „Screen 1”
Device „** NVIDIA (generic) [nv]”
Monitor „My Monitor”
DefaultDepth 24

Subsection „Display”
Depth 8
Modes „640×480” „800×600” „1024×768”
ViewPort 0 0
EndSubsection
Subsection „Display”
Depth 16
Modes „640×480” „800×600” „1024×768”
ViewPort 0 0
EndSubsection
Subsection „Display”
Depth 24
Modes „1024×768”
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# „-layout” option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section „ServerLayout”

# The Identifier line must be present
Identifier „Simple Layout”

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen „Screen 1”

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include „CorePointer”, „CoreKeyboard” and
# „SendCoreEvents”.

InputDevice „Mouse1” „CorePointer”
InputDevice „Keyboard1” „CoreKeyboard”

EndSection

# Section „DRI”
# Mode 0666
# EndSection

Kérdés: van-e valami elrontva, vagy ez a dolog „normális”?
A rendszer gentoo, frissen tartva (xorg 6.8.2)