ez a kimenete:

I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name=”AT Translated Set 2 keyboard”
P: Phys=isa0060/serio0/input0
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000078 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0011 Vendor=0002 Product=0005 Version=0000
N: Name=”ImPS/2 Generic Wheel Mouse”
P: Phys=isa0060/serio1/input0
H: Handlers=mouse0 event1
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103

De suse látta csak a ttyS1 nek, fedora 4 semminek sem látja:(

[root@localhost zc9]# cat /proc/bus/usb/devices

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.14-1.1637_FC4 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=  2 Ivl=255ms

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.14-1.1637_FC4 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=  2 Ivl=255ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.14-1.1637_FC4 uhci_hcd
S:  Product=UHCI Host Controller
S:  SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=  2 Ivl=255ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 6
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.14-1.1637_FC4 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=  2 Ivl=256ms

Ezek csak a usb host-jaid… olyan, mintha rá sem lenne dugva.

Esetleg próbáld meg azt, hogy add ki a
#cat /dev/ttySx
parancsot, ahol x = 0, 1,…, majd nyomogasd a gombokat, akkor kiír a konzolra valamit?

[root@localhost sbin]# irdadump /dev/ttyS0
19:45:49.577669 xid:cmd c80f4bda > ffffffff S=6 s=0 (14)
19:45:49.577806 xid:cmd 5e475275 > ffffffff S=6 s=0 (14)
19:45:49.663143 xid:cmd c80f4bda > ffffffff S=6 s=1 (14)
19:45:49.663190 xid:cmd 5e475275 > ffffffff S=6 s=1 (14)
19:45:49.751152 xid:cmd c80f4bda > ffffffff S=6 s=2 (14)
19:45:49.751198 xid:cmd 5e475275 > ffffffff S=6 s=2 (14)
19:45:49.839157 xid:cmd c80f4bda > ffffffff S=6 s=3 (14)
19:45:49.839204 xid:cmd 5e475275 > ffffffff S=6 s=3 (14)
19:45:49.927165 xid:cmd c80f4bda > ffffffff S=6 s=4 (14)
19:45:49.927211 xid:cmd 5e475275 > ffffffff S=6 s=4 (14)
19:45:50.015171 xid:cmd c80f4bda > ffffffff S=6 s=5 (14)
19:45:50.015218 xid:cmd 5e475275 > ffffffff S=6 s=5 (14)
19:45:50.103174 xid:cmd c80f4bda > ffffffff S=6 s=* localhost hint=c404 [ Computer LAN Access IrCOMM ] (26)
19:45:50.103220 xid:cmd 5e475275 > ffffffff S=6 s=* localhost hint=c404 [ Computer LAN Access IrCOMM ] (26)

Nah eddig ez sem volt. Most átdugtam egy másik USB -be és most már ijen van