borbelyimi

Hozzászólások

10 bejegyzés megtekintése - 61-70 / 204
  • Szerző
    Bejegyzés
  • Hozzászólás: „Trial” boot #2025000
    borbelyimi
    Felhasználó

      figyu Imi a hda1 tövében miért kellene tudnod tölteni?..
      az xp-vel már kiütötted a bootmanagerét, vagy nem?

      kellene a lemezed térképe!
      [align=right][snapback]143798[/snapback][/align]

      Nem egészen értem mit is akarsz mondani.
      Közben kicsit változott a helyzet. Elõbb telepítettem fel az XP-t, és csak utána a 98-at.

      Hozzászólás: IPCop és Squid finomságok… #2002163
      borbelyimi
      Felhasználó

        Bocs, azt hiszem nem voltam elég világos.
        Nem az IPCop-ból akarok nyomtatószervert csinálni, hanem egy olyan rendszert keresek, ami speciálisan nyomtatószervernek lett kitalálva, és hasonlóan egyszerûen konfigurálható.

        Hozzászólás: IPCop és Squid finomságok… #2002161
        borbelyimi
        Felhasználó

          Nem tud valaki véletlen egy IPCop szerû rendszert, amit lehetne nyomtató-szerverként használni?

          Hozzászólás: IPCop és Squid finomságok… #2002160
          borbelyimi
          Felhasználó

            Akkor holnap nekiugrok én is kipróbálom a frissítést!

            Hozzászólás: IPCop és Squid finomságok… #2002158
            borbelyimi
            Felhasználó

              Jó ötlet ez az automatikus újraindítás! Mennyire mûködik stabilan?
              Nekem a ProxSMTP rendszeresen leállt, ezért kellett csinálnom egy scriptet, ami két óránként újraindítja. Azóta nincs is vele gond.
              Kíváncsi leszek, hogy sikerül-e frissítenem, vagy megint mindent újra kell telepítenem!

              Hozzászólás: Valknut #1999460
              borbelyimi
              Felhasználó

                Sziasztok!
                Feltettem a 0.3.7-es Valknutot forrásból. De indításkor a következõ hibaüzenetet kapom:

                Code:
                valknut: Symbol `_ZN7CSocket9m_TrafficE’ has different size in shared object, consider re-linking
                Checking xml version …
                Compiled for ‘20613’ using ‘20617’
                Checking dclib version …
                Using ‘0.3.7’
                Checking Qt (TM) version …
                Compiled for ‘3.3.3’ using ‘3.3.4’
                Checking Qt (TM) privates …
                private test ok !
                *** glibc detected *** malloc(): memory corruption: 0x081d59a8 ***
                Aborted

                Persze a Valknut nem indul el. 🙁
                Tudja valaki, hogy ez mit jelenthet? Sajnos a neten nem sok használható infót találtam.
                Elõre is köszönöm!

                Hozzászólás: blackPanther Install #2021123
                borbelyimi
                Felhasználó

                  Válassz ki egy vesa meghajtót hogy elinduljon az X rendesen majd a utána tudsz kisérletezni egyéb meghajtó kiválasztásával is. Manuálisan is tudod szerkeszteni az xorg.conf fájlt ha a driver sorban levõ meghajót vesa-ra javítod majd kiaod a :
                  service dm restart
                  parancsot.
                  [align=right][snapback]140319[/snapback][/align]

                  Köszi a segítséget! Már megy! Telepítés után pedig be tudtam állítani a jó meghajtót!

                  Hozzászólás: blackPanther Install #2021108
                  borbelyimi
                  Felhasználó

                    Sziasztok!
                    Sajnos nem tudom elindítani. 🙁
                    Nem jön be a grafikus felület. A következõ hibaüzenetet kapom:

                    Nem tudtam elindítani az X kiszolgálót.

                    Hozzászólás: Telepítési gond! Pls help! #2016827
                    borbelyimi
                    Felhasználó

                      Szia borbelyimi!
                      Lehet, hogy hülyeséget kérdezek de gtk-s devel fent van? Dialog?

                      Hozzászólás: Telepítési gond! Pls help! #2016825
                      borbelyimi
                      Felhasználó

                        Sziasztok!
                        Nekem is a telepítéssel van gondom. Forrásból próbálom telepíteni a 0.3.7-est, Mandriva alá., de valamiért nem megy. 🙁
                        A configure ezt írja ki:

                        Code:
                        checking build system type… i686-pc-linux-gnu
                        checking host system type… i686-pc-linux-gnu
                        checking target system type… i686-pc-linux-gnu
                        checking for a BSD-compatible install… /usr/bin/install -c
                        checking for -p flag to install… yes
                        checking whether build environment is sane… yes
                        checking for gawk… gawk
                        checking whether make sets $(MAKE)… yes
                        checking for style of include used by make… GNU
                        checking for gcc… gcc
                        checking for C compiler default output… a.out
                        checking whether the C compiler works… yes
                        checking whether we are cross compiling… no
                        checking for suffix of executables…
                        checking for suffix of object files… o
                        checking whether we are using the GNU C compiler… yes
                        checking whether gcc accepts -g… yes
                        checking for gcc option to accept ANSI C… none needed
                        checking dependency style of gcc… gcc3
                        checking for xml2-config… /usr/bin/xml2-config
                        checking for libxml – version >= 2.0.0… yes (version 2.6.17)
                        checking for gcc… (cached) gcc
                        checking whether we are using the GNU C compiler… (cached) yes
                        checking whether gcc accepts -g… (cached) yes
                        checking for gcc option to accept ANSI C… (cached) none needed
                        checking dependency style of gcc… (cached) gcc3
                        checking how to run the C preprocessor… gcc -E
                        checking for g++… g++
                        checking whether we are using the GNU C++ compiler… yes
                        checking whether g++ accepts -g… yes
                        checking dependency style of g++… gcc3
                        checking whether g++ supports -Wmissing-format-attribute… yes
                        checking whether g++ supports -Wundef… yes
                        checking whether g++ supports -Wno-long-long… yes
                        checking whether g++ supports -Wnon-virtual-dtor… yes
                        checking whether g++ supports -fno-exceptions… yes
                        checking whether g++ supports -fno-check-new… yes
                        checking whether g++ supports -fno-common… yes
                        checking whether g++ supports -fexceptions… yes
                        checking how to run the C++ preprocessor… g++ -E
                        checking whether g++ supports -O0… yes
                        checking whether g++ supports -Wl,–no-undefined… yes
                        checking whether g++ supports -Wl,–allow-shlib-undefined… yes
                        checking for a sed that does not truncate output… /bin/sed
                        checking for egrep… grep -E
                        checking for ld used by gcc… /usr/bin/ld
                        checking if the linker (/usr/bin/ld) is GNU ld… yes
                        checking for /usr/bin/ld option to reload object files… -r
                        checking for BSD-compatible nm… /usr/bin/nm -B
                        checking whether ln -s works… yes
                        checking how to recognise dependent libraries… pass_all
                        checking for ANSI C header files… yes
                        checking for sys/types.h… yes
                        checking for sys/stat.h… yes
                        checking for stdlib.h… yes
                        checking for string.h… yes
                        checking for memory.h… yes
                        checking for strings.h… yes
                        checking for inttypes.h… yes
                        checking for stdint.h… yes
                        checking for unistd.h… yes
                        checking dlfcn.h usability… yes
                        checking dlfcn.h presence… yes
                        checking for dlfcn.h… yes
                        checking for g77… no
                        checking for f77… no
                        checking for xlf… no
                        checking for frt… no
                        checking for pgf77… no
                        checking for fl32… no
                        checking for af77… no
                        checking for fort77… no
                        checking for f90… no
                        checking for xlf90… no
                        checking for pgf90… no
                        checking for epcf90… no
                        checking for f95… no
                        checking for fort… no
                        checking for xlf95… no
                        checking for lf95… no
                        checking for g95… no
                        checking whether we are using the GNU Fortran 77 compiler… no
                        checking whether  accepts -g… no
                        checking the maximum length of command line arguments… 32768
                        checking command to parse /usr/bin/nm -B output from gcc object… ok
                        checking for objdir… .libs
                        checking for ar… ar
                        checking for ranlib… ranlib
                        checking for strip… strip
                        checking if gcc static flag  works… yes
                        checking if gcc supports -fno-rtti -fno-exceptions… no
                        checking for gcc option to produce PIC… -fPIC
                        checking if gcc PIC flag -fPIC works… yes
                        checking if gcc supports -c -o file.o… yes
                        checking whether the gcc linker (/usr/bin/ld) supports shared libraries… yes
                        checking whether -lc should be explicitly linked in… no
                        checking dynamic linker characteristics… GNU/Linux ld.so
                        checking how to hardcode library paths into programs… immediate
                        checking whether stripping libraries is possible… yes
                        checking if libtool supports shared libraries… yes
                        checking whether to build shared libraries… yes
                        checking whether to build static libraries… no
                        configure: creating libtool
                        appending configuration tag „CXX” to libtool
                        checking for ld used by g++… /usr/bin/ld
                        checking if the linker (/usr/bin/ld) is GNU ld… yes
                        checking whether the g++ linker (/usr/bin/ld) supports shared libraries… yes
                        checking for g++ option to produce PIC… -fPIC
                        checking if g++ PIC flag -fPIC works… yes
                        checking if g++ supports -c -o file.o… yes
                        checking whether the g++ linker (/usr/bin/ld) supports shared libraries… yes
                        checking dynamic linker characteristics… GNU/Linux ld.so
                        checking how to hardcode library paths into programs… immediate
                        checking whether stripping libraries is possible… yes
                        appending configuration tag „F77” to libtool
                        checking for strlcat… no
                        checking if strlcat needs custom prototype… yes – in libkdefakes
                        checking for strlcpy… no
                        checking if strlcpy needs custom prototype… yes – in libkdefakes
                        checking for main in -lutil… yes
                        checking for main in -lcompat… no
                        checking for crypt in -lcrypt… yes
                        checking for socklen_t… socklen_t
                        checking for dnet_ntoa in -ldnet… no
                        checking for dnet_ntoa in -ldnet_stub… no
                        checking for inet_ntoa… yes
                        checking for connect… yes
                        checking for remove… yes
                        checking for shmat… yes
                        checking for sys/types.h… (cached) yes
                        checking for stdint.h… (cached) yes
                        checking for poll in -lpoll… no
                        checking CoreAudio/CoreAudio.h usability… no
                        checking CoreAudio/CoreAudio.h presence… no
                        checking for CoreAudio/CoreAudio.h… no
                        checking if res_init needs -lresolv… yes
                        checking if res_init is available… yes
                        checking for killpg in -lucb… no
                        checking for int… yes
                        checking size of int… 4
                        checking for long… yes
                        checking size of long… 4
                        checking for char *… yes
                        checking size of char *… 4
                        checking for dlopen in -ldl… yes
                        checking for shl_unload in -ldld… no
                        checking for size_t… yes
                        checking size of size_t… 4
                        checking for unsigned long… yes
                        checking size of unsigned long… 4
                        checking sizeof size_t == sizeof unsigned long… yes
                        checking crt_externs.h usability… no
                        checking crt_externs.h presence… no
                        checking for crt_externs.h… no
                        checking for _NSGetEnviron… no
                        checking for vsnprintf… yes
                        checking for snprintf… yes
                        not using lib directory suffix
                        checking for X… libraries /usr/X11R6/lib, headers /usr/X11R6/include
                        checking for IceConnectionNumber in -lICE… yes
                        checking for libXext… yes
                        checking for pthread_create in -lpthread… yes
                        checking for extra includes… no
                        checking for extra libs… no
                        checking for libz… -lz
                        checking for libpng… -lpng -lz -lm
                        checking for libjpeg6b… no
                        checking for libjpeg… -ljpeg
                        checking for perl… /usr/bin/perl
                        checking for Qt… libraries /usr/lib/qt3//lib, headers /usr/lib/qt3//include using -mt
                        checking for lrelease… /usr/lib/qt3//bin/lrelease
                        checking for moc… /usr/lib/qt3//bin/moc
                        checking for uic… /usr/lib/qt3//bin/uic
                        checking whether uic supports -L … yes
                        checking whether uic supports -nounload … yes
                        checking if Qt needs -ljpeg… no
                        checking for sigcontext… yes
                        checking for sigcontext linux… yes
                        checking for sigcontext freebsd… no
                        checking for dlopen in -ldl… (cached) yes
                        checking for shl_unload in -ldld… (cached) no
                        checking for OpenSSL… libraries /usr/lib, headers /usr/include
                        checking whether OpenSSL uses rsaref… no
                        checking for easter eggs… none found
                        checking for OpenSSL version… ok
                        checking for dclib… yes
                        checking bzlib.h usability… yes
                        checking bzlib.h presence… yes
                        checking for bzlib.h… yes
                        checking for BZ2_bzlibVersion in -lbz2… yes
                        checking for bzDecompress in libbz2… no
                        checking whether g++ supports -shared… yes
                        checking whether g++ supports -fPIC… yes
                        checking for BZ2_bzDecompress in (shared) libbz2… -lbz2
                        checking for Valknut-datapath… /usr/local/share/valknut
                        configure: creating ./config.status
                        config.status: creating Makefile
                        config.status: creating valknut.spec
                        config.status: creating valknut.lsm
                        config.status: creating valknut/Makefile
                        config.status: creating valknut/docs/Makefile
                        config.status: creating valknut/docs/en/Makefile
                        config.status: creating valknut/icons/Makefile
                        config.status: creating valknut/sounds/Makefile
                        config.status: creating valknut/ui/Makefile
                        config.status: creating valknut/ts/Makefile
                        config.status: creating config.h
                        config.status: config.h is unchanged
                        config.status: executing depfiles commands

                        A make ezt:

                        Code:
                        make  all-recursive
                        make[1]: Entering directory `/home/imi/Backup/Valknut/valknut-0.3.7′
                        Making all in valknut
                        make[2]: Entering directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut’
                        Making all in docs
                        make[3]: Entering directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut/docs’
                        Making all in en
                        make[4]: Entering directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut/docs/en’
                        make[4]: Nothing to be done for `all’.
                        make[4]: Leaving directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut/docs/en’
                        make[4]: Entering directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut/docs’
                        make[4]: Nothing to be done for `all-am’.
                        make[4]: Leaving directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut/docs’
                        make[3]: Leaving directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut/docs’
                        Making all in icons
                        make[3]: Entering directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut/icons’
                        make[3]: Nothing to be done for `all’.
                        make[3]: Leaving directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut/icons’
                        Making all in sounds
                        make[3]: Entering directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut/sounds’
                        make[3]: Nothing to be done for `all’.
                        make[3]: Leaving directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut/sounds’
                        Making all in ui
                        make[3]: Entering directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut/ui’
                        if /bin/sh ../../libtool –silent –mode=compile g++ -DHAVE_CONFIG_H -I. -I. -I../.. -I/usr/lib/qt3//include -I/usr/X11R6/include -I..  -DQT_THREAD_SUPPORT  -D_REENTRANT -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -I/usr/local/include -I/usr/include/libxml2  -Wnon-virtual-dtor -Wno-long-long -Wundef -Wall -W -Wpointer-arith -Wwrite-strings -ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wconversion -Wchar-subscripts -O2 -Wformat-security -Wmissing-format-attribute -fno-exceptions -fno-check-new -fno-common -MT cdialogmessage.lo -MD -MP -MF „.deps/cdialogmessage.Tpo”
                         -c -o cdialogmessage.lo `test -f ‘cdialogmessage.cpp’ || echo ‘./’`cdialogmessage.cpp;
                        then mv -f „.deps/cdialogmessage.Tpo” „.deps/cdialogmessage.Plo”;
                        else rm -f „.deps/cdialogmessage.Tpo”; exit 1;
                        fi
                        In file included from cdialogmessage.cpp:24:
                        cdialogmessage.h:24:29: DCDialogMessage.h: No such file or directory
                        In file included from cdialogmessage.cpp:24:
                        cdialogmessage.h:30: error: expected class-name before ‘{‘ token
                        cdialogmessage.cpp: In constructor `CDialogMessage::CDialogMessage(QWidget*, QMessageBox::Icon, QString, QString, const QString&, const QString&, const QString&)’:
                        cdialogmessage.cpp:33: error: class `CDialogMessage’ does not have any field named `DCDialogMessage’
                        cdialogmessage.cpp:35: error: `setCaption’ undeclared (first use this function)
                        cdialogmessage.cpp:35: error: (Each undeclared identifier is reported only oncefor each function it appears in.)
                        cdialogmessage.cpp:36: error: `TextLabel_TEXT’ undeclared (first use this function)
                        cdialogmessage.cpp:40: error: `PushButton0′ undeclared (first use this function)
                        cdialogmessage.cpp:45: error: `connect’ undeclared (first use this function)
                        cdialogmessage.cpp:50: error: `PushButton1′ undeclared (first use this function)
                        cdialogmessage.cpp:60: error: `PushButton2′ undeclared (first use this function)
                        cdialogmessage.cpp:71: error: `PixmapLabel_ICON’ undeclared (first use this function)
                        cdialogmessage.cpp:83: error: `adjustSize’ undeclared (first use this function)
                        cdialogmessage.cpp: In member function `bool CDialogMessage::GetCheckBoxStatus()’:
                        cdialogmessage.cpp:94: error: `CheckBox_SHOW’ undeclared (first use this function)
                        cdialogmessage.cpp: In member function `void CDialogMessage::slotPushButton0Clicked()’:
                        cdialogmessage.cpp:100: error: `done’ undeclared (first use this function)
                        cdialogmessage.cpp: In member function `void CDialogMessage::slotPushButton1Clicked()’:
                        cdialogmessage.cpp:106: error: `done’ undeclared (first use this function)
                        cdialogmessage.cpp: In member function `void CDialogMessage::slotPushButton2Clicked()’:
                        cdialogmessage.cpp:112: error: `done’ undeclared (first use this function)
                        make[3]: *** [cdialogmessage.lo] Error 1
                        make[3]: Leaving directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut/ui’
                        make[2]: *** [all-recursive] Error 1
                        make[2]: Leaving directory `/home/imi/Backup/Valknut/valknut-0.3.7/valknut’
                        make[1]: *** [all-recursive] Error 1
                        make[1]: Leaving directory `/home/imi/Backup/Valknut/valknut-0.3.7′
                        make: *** [all] Error 2

                        Nem tudja valaki mi lehet a probléma?

                      10 bejegyzés megtekintése - 61-70 / 204