Hozzászólások
-
Bejegyzés
-
van itt meg vmi amit nem nagyon ertek…ez miert van igy ???
Code:root[~]# fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: http://www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.5)root[~]# exit
exit
hybrid[root]$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9200 Series DDR Generic
OpenGL version string: 1.3.1091 (X4.3.0-8.28.8)hybrid[root]$
es meg vmi…tegyuk fel h telleg fent van a driver rendesen megy meg minden, de a warcraft 3 miert szaggat nagyon ??
fiuk orok halam 😀 😀
Code:hybrid[~]$ glxgears
10123 frames in 5.0 seconds = 2024.544 FPS
hybrid[~]$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: RADEON 9200 Series DDR Generic
OpenGL version string: 1.3.1091 (X4.3.0-8.28.8)hybrid[~]$ glxinfo | grep direct
direct rendering: Yes
hybrid[~]$ fgl_glxgears
Using GLX_SGIX_pbuffer
1307 frames in 5.0 seconds = 261.400 FPS
1573 frames in 5.0 seconds = 314.600 FPS
hybrid[~]$mindenkinek nagyon koszon, majd leirom hogy, hogy jott ossze csak orvendjem ki magam 😀
igen, miutan minden lefut hibatlanbul akor csinalom…
most nemtom de lehet az a baj h en az X.Org os drivert szedtem le netrol es nem az egeszet egyben marmint ati-driver-installer…run -t ??? 😐
ha igen akor kovezzetek meg….azert irom mindig be h aticonfig –initial mert mindig viszairom a regi xorg.conf-ot h mukodjon az X -em…me maskepp nem megy..es probaltam h beraktam a vegere amit irtatok es akor se indul az X. ugyanaz a hiba h nem tolti be a modult…es nem grafikus driver installom van hanem fglrx……tgz (rpm2tgz segitsegevel)
es mindig consolbol csinaltam mindent…no de nemtudom mi lehet megis a baj…Code:root[build_mod]# sh make.sh
ATI module generator V 2.0
==========================
initializing…
make.sh: line 518: [: =: unary operator expected
cleaning…
patching ‘highmem.h’…
assuming new VMA API since we do have kernel 2.6.x…
Assuming default VMAP API
doing Makefile based build for kernel 2.6.x and higher
make -C /lib/modules/2.6.18.6/build SUBDIRS=/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory `/usr/src/linux-2.6.18.6′
Building modules, stage 2.
MODPOST
make[1]: Leaving directory `/usr/src/linux-2.6.18.6’
build succeeded with return value 0
duplicating results into driver repository…
done.
==============================
You must change your working directory to /lib/modules/fglrx
and then call ./make_install.sh in order to install the built module.
==============================
root[build_mod]# cd ../
root[fglrx]# sh make_install.sh
– recreating module dependency list
– trying a sample load of the kernel modules
done.
root[fglrx]# aticonfig –initial
Uninitialised file found, configuring.
Using /etc/X11/xorg.conf
Saved back-up to /etc/X11/xorg.conf.original-1
root[fglrx]# modprobe fglrx
root[fglrx]# lsmod |grep fglrx
fglrx 340460 0
root[fglrx]#itt van a folyamat…mindjart csatolom a logot is csak x restart…
na meg is volt csatolom a fajlokat a xorg.conf az aticonfig utan van, tehat amivel nem megy 🙂balev wrote:Hybrid!Amíg nincs beállítva a kerneled, addig nem is fogja tudni betölteni a modult.
1. A DRM-et kiszeded
2. /dev/agpgart-ot fixen! beteszed
3. agp_via-t fixen! beteszed (minden egyéb drm, agp-t kiveszel modulból)Pl. itt (nekem nforce, ne zavarjon be):
http://balev.cjb.hu/kernel1.png
http://balev.cjb.hu/kernel2.png
http://balev.cjb.hu/kernel3.png4. Újrafordítod a kernelt, lemented a kernelképet és bebootolsz vele.
5. Újrafordítod a modult (/lib/modules/fglrx alatt található, feljebb már olvasható két szkript segítségével)
6. Betöltöd a modult (modprobe fglrx) Ellenőrzöd (lsmod | grep fglrx)
7. Újraindítod az X-et (CTRL-ALT-Backspace)
8. Ellenőrzöd, hogy van-e 3d (glxinfo, fglrxinfo)megcsinaltam mindent…es megse megy…
Code:root[hybrid]# fgrep AGP /usr/src/linux/.config
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
root[hybrid]# fgrep DRM /usr/src/linux/.config
# CONFIG_DRM is not set
root[hybrid]#Code:root[hybrid]# lsmod | grep fglrx
fglrx 340460 0es miutan beirom h aticonfig –initial es ujrainditom az X-et nem indul….
Xorg log EE-jeiCode:root[hybrid]# cat /var/log/Xorg.0.log |grep EE
Current Operating System: Linux zenwalk 2.6.18.6 #7 SMP PREEMPT Tue Jan 16 16:50:23 EET 2007 i686
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
(EE) AIGLX: Screen 0 is not DRI capable
root[hybrid]#es WW-jei 🙂
Code:root[hybrid]# cat /var/log/Xorg.0.log |grep WW
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) `fonts.dir’ not found (or not valid) in „/usr/share/fonts/75dpi”.
(WW) `fonts.dir’ not found (or not valid) in „/usr/share/fonts/100dpi”.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(WW) RADEON(0): Direct rendering disabled
root[hybrid]#ime a glxinfo is:
Code:root[hybrid]# glxinfo |grep direct
Xlib: extension „XFree86-DRI” missing on display „:0.0”.
direct rendering: No
OpenGL renderer string: Mesa GLX Indirectpomm wrote:Hybrid wrote:hat elolvastam es be ist tettem� a xorg.conf -om vegere amit irtak de ugy se mukodik…ugyanaz a hiba….tehat fglrx modul nem mukodik….pedig ugy irja h sikeresen lefut minden…Code:root[build_mod]# sh make.sh
ATI module generator V 2.0
==========================
initializing…
make.sh: line 518: [: =: unary operator expected
cleaning…
patching ‘highmem.h’…
assuming new VMA API since we do have kernel 2.6.x…
Assuming default VMAP API
doing Makefile based build for kernel 2.6.x and higher
make -C /lib/modules/2.6.18.6/build SUBDIRS=/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory `/usr/src/linux-2.6.18.6′
� Building modules, stage 2.
� MODPOST
make[1]: Leaving directory `/usr/src/linux-2.6.18.6’
build succeeded with return value 0
duplicating results into driver repository…
done.
==============================
You must change your working directory to /lib/modules/fglrx
and then call ./make_install.sh in order to install the built module.
==============================es utana:
Code:root[build_mod]# cd ..
root[fglrx]# sh make_install.sh
– recreating module dependency list
– trying a sample load of the kernel modules
done.
root[fglrx]#es meg se mukodik….
Olvad el ezt és ha lefuttattad az aticonfig –initial parancsot, akkor editáld az xorg.conf-ot!
elolvastam es ugy allitottam mindent be es nem fut le a make_install.sh…ezt irja ???:
Code:root[fglrx]# sh make_install.sh
– recreating module dependency list
– trying a sample load of the kernel modules
FATAL: Error inserting fglrx (/lib/modules/2.6.18.6/kernel/drivers/char/drm/fglrx.ko): Operation not permitted
failed.mielott meg rakerdeznetek rootkent csinaltam amint laccik is…
legutóbbi hsz