Bárcsak így lenne.
De sajnos nem ez a helyzet.

Köszönöm az eddigi segítséget mindenkinek, de átállok az Ubuntu 8.04-re, úgy néz ki azzal menni fog a dolog, bár még azzal sem megy egyelőre. Viszont nyomon vagyok…

Az ntfs-3g -t letöltöttem, de annyira zöldfülű vagyok, hogy nem tudok mit kezdeni vele.
Sehol egy setup.exe !  :-
Köszönöm a gyors válaszokat, holnap kielemzem, de most már aludnom kell, sok a dolog holnap. 

ok. íme:

RTL8180 Linux Driver version 1.2 readme file for driver running on station mode.

The driver is composed of several parts:
    (1)source code
        driver module initialization and interface between rtl8180 driver and system call.
        r8180_pci_init.c    driver module initialization and register/unregister network device
        r8180_pci_init.h    include file
        r8180_if.c          interface between rtl8180 driver and system call
        r8180_if.h          include file
        r8180_type.h        type definition for rtl8180 driver
        r8180_export.h      exported function name from rtl8180 driver

    (2)object code
        rtl8180 driver
        priv_part.o        rtl8180 driver object code

    (3)Default driver
        rtl8180_24x.o      default driver module compiled in kernel 2.4.18.

    (4)Makefile
PLEASE SPECIFY INCLUDEPATH CORRECTLY ACCORDING TO YOUR LINUX ENVIRONMENT.
FOR EXAMPLE, ” INCLUDEPATH=-I /usr/src/linux-2.4.18-3/include/ ” in RedHat7.3.
FOR EXAMPLE, ” INCLUDEPATH=-I /usr/src/linux-2.4.18-14/include/ ” in RedHat8.0.

    (5)wlanup/wlandown
        simple script file to activate/shut_down wireless lan.

Please try to load linux_24x.o first by „insmod -f rtl8180_24x.o”.
If it doesn’t work, you are suggested to compile loadable driver module following the steps as:
    (0)Make sure the C-compile version. Run „gcc -v”.
      If gcc version is 2.xx, use release driver RTL8180_24x_RH73.zip.
      If gcc version is 3.xx, use release driver RTL8180_24x_SuSE.zip.
    (1)Modify macros in Makefile. For example, KERNELRELEASE, IO_FLAGS, ENDIAN_FLAGS, INCLUDEPATH
      and RTL8180_TARGET which represent kernel release version, pci I/O space mapping,
      big/little endian, rtl8180 driver name.
    (2)Check pci module initialization and system call interfaces in the provided source code,
      r8180_pci_init.c ….etc.
    (3)Run ‘make’ to generate new driver module.
    (4)Load driver by „insmod xxx.o”

After driver being loaded successfully, set Wireless LAN specific parameters as follows
and enable wlan device by „iwpriv wlan0 enable” manually.
Or modify script files, wlanup/wlandown, to activate/shut_down wireless lan.

This driver uses Wireless Extension as an interface allowing you to set
Wireless LAN specific parameters.
Current driver supports „iwpriv”, manipulate driver private ioctls, to set MIBs.

        iwpriv wlan0 wlan_para [parameters]=[val]
where

        parameter explaination      [parameters]        [val] constraints
       

---

   

---

     

---

        Set channel number          channel            {1~14}
        Set basic rates            basicrates          {bit0 = 1Mbps, bit1 = 2Mbps, bit2 = 5.5Mbps, bit3 = 11 Mbps}
        Set operational rates      oprates            {bit0 = 1Mbps, bit1 = 2Mbps, bit2 = 5.5Mbps, bit3 = 11 Mbps}
        Set authentication type    authtype            {opensystem, sharedkey, both}
        Set desired ssid to scan    ssid2scan          {0~z, less than 32 characters}
        Set RTS threshold          rtsthres            {256~2304}
        Set fragment threshold      fragthres          {256~2304}
        Set preamble mode          preamble            {short,long,auto}
        Set network type            networktype        {infra,adhoc,auto}
        Set WEP mode                wepmode            {off,wep40,wep104}
        Set WEP default key ID      wepdkeyid          {0~3}
        Set 1st WEP40 key value    wepkey40_1          {0~f, total 10 characters}
        Set 2st WEP40 key value    wepkey40_2          {0~f, total 10 characters}
        Set 3st WEP40 key value    wepkey40_3          {0~f, total 10 characters}
        Set 4st WEP40 key value    wepkey40_4          {0~f, total 10 characters}
        Set 1st WEP104 key value    wepkey104_1        {0~f, total 26 characters}
        Set 2st WEP104 key value    wepkey104_2        {0~f, total 26 characters}
        Set 3st WEP104 key value    wepkey104_3        {0~f, total 26 characters}
        Set 4st WEP104 key value    wepkey104_4        {0~f, total 26 characters}
        Print help message          help

For example:

        iwpriv wlan0 wlan_para channel=1
        iwpriv wlan0 wlan_para basicrates=0xf
        iwpriv wlan0 wlan_para oprates=0xf
        iwpriv wlan0 wlan_para authtype=opensystem
        iwpriv wlan0 wlan_para ssid2scan=testssid
        iwpriv wlan0 wlan_para fragthres=512
        iwpriv wlan0 wlan_para preamble=long
        iwpriv wlan0 wlan_para wepmode=off
        iwpriv wlan0 wlan_para wepdkeyid=0
        iwpriv wlan0 wlan_para wepkey40_1=0123456789
        iwpriv wlan0 wlan_para wepkey104_1=01234567890123456789012345
        iwpriv wlan0 wlan_para networktype=infra
        iwpriv wlan0 wlan_para help;

Also, you could set more than one parameter at the same time. For example:

        iwpriv wlan0 wlan_para basicrates=0xf,authtype=opensystem,ssid2scan=testssid

persze nem ragaszkodok ezekhez a fájlokhoz, csak be szeretném izzítani a wlan kártyát.
:blink: