maczy

Hozzászólások

10 bejegyzés megtekintése - 1-10 / 16
  • Szerző
    Bejegyzés
  • Hozzászólás: Bootolás #2138734
    maczy
    Felhasználó

      Nagyon köszi a segítséget megoldódott a bootolás.
      És még találtam egy progit is ami kilövi a boot recordsot.
      Köszi mégegyszer

      Hozzászólás: Bootolás #2138735
      maczy
      Felhasználó

        Nagyon köszi a segítséget megoldódott a bootolás.
        És még találtam egy progit is ami kilövi a boot recordsot.
        Köszi mégegyszer

        Hozzászólás: ATI radeon 9600 xt #2122883
        maczy
        Felhasználó

          Sziasztok!
          Most hogy müködik a videókártyám, azt szeretném megkérdezni hogy a berylt hogy kell elinditani. Letöltöttem és a rendszereszközök ben van egy setting manager. Hogyan lehet azokat aktiválni?

          Hozzászólás: ATI radeon 9600 xt #2122873
          maczy
          Felhasználó

            Na sikerült ujra raknom az egészet.
            És most van direct renderingem. Ilyenkor azért ki tudom tenni a kérdőjelet , hogy ez mitől lehet.
            A xorgconf:

            /etc/X11/xorg.conf (xorg X Window System server configuration file)
            #
            # This file was generated by dexconf, the Debian X Configuration tool, using
            # values from the debconf database.
            #
            # Edit this file with caution, and see the xorg.conf(5) manual page.
            # (Type „man xorg.conf” at the shell prompt.)
            #
            # This file is automatically updated on xserver-xorg package upgrades *only*
            # if it has not been modified since the last upgrade of the xserver-xorg
            # package.
            #
            # If you have edited this file but would like it to be automatically updated
            # again, run the following command:
            #  sudo dpkg-reconfigure -phigh xserver-xorg

            Section „Files”
                Fontpath    „/usr/share/fonts/X11/misc”
                Fontpath    „/usr/share/fonts/X11/cyrillic”
                Fontpath    „/usr/share/fonts/X11/100dpi/:unscaled”
                Fontpath    „/usr/share/fonts/X11/75dpi/:unscaled”
                Fontpath    „/usr/share/fonts/X11/Type1”
                Fontpath    „/usr/share/fonts/X11/100dpi”
                Fontpath    „/usr/share/fonts/X11/75dpi”
                # path to defoma fonts
                Fontpath    „/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType”
            EndSection

            Section „Module”
                Load   „i2c”
                Load   „bitmap”
                Load   „ddc”
                Load   „dri”
                Load   „extmod”
                Load   „freetype”
                Load   „glx”
                Load   „int10”
                Load   „vbe”
            EndSection

            Section „InputDevice”
                Identifier    „Generic Keyboard”
                Driver   „kbd”
                Option   „CoreKeyboard”
                Option   „XkbRules”    „xorg”
                Option   „XkbModel”    „pc105”
                Option   „XkbLayout”    „hu”
            EndSection

            Section „InputDevice”
                Identifier    „Configured Mouse”
                Driver   „mouse”
                Option   „CorePointer”
                Option   „Device”    „/dev/input/mice”
                Option   „Protocol”    „ImPS/2”
                Option   „ZAxisMapping”    „4 5”
                Option   „Emulate3Buttons”    „true”
            EndSection

            Section „InputDevice”
                Driver   „wacom”
                Identifier    „stylus”
                Option   „Device”    „/dev/input/wacom”
                Option   „Type”    „stylus”
                Option   „ForceDevice”    „ISDV4″# Tablet PC ONLY
            EndSection

            Section „InputDevice”
                Driver   „wacom”
                Identifier    „eraser”
                Option   „Device”    „/dev/input/wacom”
                Option   „Type”    „eraser”
                Option   „ForceDevice”    „ISDV4″# Tablet PC ONLY
            EndSection

            Section „InputDevice”
                Driver   „wacom”
                Identifier    „cursor”
                Option   „Device”    „/dev/input/wacom”
                Option   „Type”    „cursor”
                Option   „ForceDevice”    „ISDV4″# Tablet PC ONLY
            EndSection

            Section „Device”
                Identifier    „ATI Technologies Inc RV350 AR [Radeon 9600]”
                Driver   „fglrx”
                Busid   „PCI:1:0:0”
            EndSection

            Section „Monitor”
                Identifier    „Generic Monitor”
                Option   „DPMS”
            EndSection

            Section „Screen”
                Identifier    „Default Screen”
                Device   „ATI Technologies Inc RV350 AR [Radeon 9600]”
                Monitor   „Generic Monitor”
                Defaultdepth    24
                SubSection „Display”
              Depth    1
              Modes   „1280×1024”    „1152×864”    „1024×768”    „832×624”    „800×600”    „720×400”    „640×480”
                EndSubSection
                SubSection „Display”
              Depth    4
              Modes   „1280×1024”    „1152×864”    „1024×768”    „832×624”    „800×600”    „720×400”    „640×480”
                EndSubSection
                SubSection „Display”
              Depth    8
              Modes   „1280×1024”    „1152×864”    „1024×768”    „832×624”    „800×600”    „720×400”    „640×480”
                EndSubSection
                SubSection „Display”
              Depth    15
              Modes   „1280×1024”    „1152×864”    „1024×768”    „832×624”    „800×600”    „720×400”    „640×480”
                EndSubSection
                SubSection „Display”
              Depth    16
              Modes   „1280×1024”    „1152×864”    „1024×768”    „832×624”    „800×600”    „720×400”    „640×480”
                EndSubSection
                SubSection „Display”
              Depth    24
              Modes   „1280×1024”    „1152×864”    „1024×768”    „832×624”    „800×600”    „720×400”    „640×480”
                EndSubSection
            EndSection

            Section „ServerLayout”
                Identifier    „Default Layout”
              screen „Default Screen”
                Inputdevice    „Generic Keyboard”
                Inputdevice    „Configured Mouse”
                Inputdevice    „stylus”    „SendCoreEvents”
                Inputdevice    „cursor”    „SendCoreEvents”
                Inputdevice    „eraser”    „SendCoreEvents”
            EndSection

            Section „DRI”
                Mode    0666
            EndSection
            Section „Extensions”
                Option   „Composite”    „0”
            EndSection

            fglrxinfo:
            display: :0.0  screen: 0
            OpenGL vendor string: ATI Technologies Inc.
            OpenGL renderer string: RADEON 9600 XT
            OpenGL version string: 2.0.6334 (8.34.8)

            glxinfo:
            name of display: :0.0
            display: :0  screen: 0
            direct rendering: Yes
            server glx vendor string: SGI
            server glx version string: 1.2
            server glx extensions:
                GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating,
                GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method,
                GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe,
                GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer
            client glx vendor string: ATI
            client glx version string: 1.3
            client glx extensions:
                GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
                GLX_ARB_get_proc_address, GLX_SGI_video_sync, GLX_ARB_multisample,
                GLX_ATI_pixel_format_float, GLX_ATI_render_texture
            GLX version: 1.2
            GLX extensions:
                GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
                GLX_ARB_multisample
            OpenGL vendor string: ATI Technologies Inc.
            OpenGL renderer string: RADEON 9600 XT
            OpenGL version string: 2.0.6334 (8.34.8)

            Hozzászólás: ATI radeon 9600 xt #2122872
            maczy
            Felhasználó

              na most elöről ujra rakom a ubuntut és akkor nem nyúlok semmihez és akkor megmutatom az infot

              Hozzászólás: ATI radeon 9600 xt #2122871
              maczy
              Felhasználó

                Sziasztok!

                Ebből látszik milyen kezdő vagyok. Hogy tudom becsatolni ide a fájlt?
                Bacsi2! Amit irtál tökéletesen möködött elöszőr, bár akkor lett még elötte egy pár dolog probálkozva. aztán csináltam egy formázást ujra raktam az egészet és akkor már valamiért nem müködött amit irtál. Nem is értem miért.

                Hozzászólás: ATI radeon 9600 xt #2122863
                maczy
                Felhasználó

                  szia itt van a xorg config
                  # /etc/X11/xorg.conf (xorg X Window System server configuration file)
                  #
                  # This file was generated by dexconf, the Debian X Configuration tool, using
                  # values from the debconf database.
                  #
                  # Edit this file with caution, and see the xorg.conf(5) manual page.
                  # (Type „man xorg.conf” at the shell prompt.)
                  #
                  # This file is automatically updated on xserver-xorg package upgrades *only*
                  # if it has not been modified since the last upgrade of the xserver-xorg
                  # package.
                  #
                  # If you have edited this file but would like it to be automatically updated
                  # again, run the following command:
                  #  sudo dpkg-reconfigure -phigh xserver-xorg

                  Section „Files”
                      Fontpath    „/usr/share/fonts/X11/misc”
                      Fontpath    „/usr/share/fonts/X11/cyrillic”
                      Fontpath    „/usr/share/fonts/X11/100dpi/:unscaled”
                      Fontpath    „/usr/share/fonts/X11/75dpi/:unscaled”
                      Fontpath    „/usr/share/fonts/X11/Type1”
                      Fontpath    „/usr/share/fonts/X11/100dpi”
                      Fontpath    „/usr/share/fonts/X11/75dpi”
                      # path to defoma fonts
                      Fontpath    „/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType”
                  EndSection

                  Section „Module”
                      Load   „i2c”
                      Load   „bitmap”
                      Load   „ddc”
                      Load   „dri”
                      Load   „extmod”
                      Load   „freetype”
                      Load   „glx”
                      Load   „int10”
                      Load   „vbe”
                      Load   „fglrx”
                  EndSection

                  Section „InputDevice”
                      Identifier    „Generic Keyboard”
                      Driver   „kbd”
                      Option   „CoreKeyboard”
                      Option   „XkbRules”    „xorg”
                      Option   „XkbModel”    „pc105”
                      Option   „XkbLayout”    „hu”
                  EndSection

                  Section „InputDevice”
                      Identifier    „Configured Mouse”
                      Driver   „mouse”
                      Option   „CorePointer”
                      Option   „Device”    „/dev/input/mice”
                      Option   „Protocol”    „ImPS/2”
                      Option   „ZAxisMapping”    „4 5”
                      Option   „Emulate3Buttons”    „true”
                  EndSection

                  Section „InputDevice”
                      Driver   „wacom”
                      Identifier    „stylus”
                      Option   „Device”    „/dev/input/wacom”
                      Option   „Type”    „stylus”
                      Option   „ForceDevice”    „ISDV4″# Tablet PC ONLY
                  EndSection

                  Section „InputDevice”
                      Driver   „wacom”
                      Identifier    „eraser”
                      Option   „Device”    „/dev/input/wacom”
                      Option   „Type”    „eraser”
                      Option   „ForceDevice”    „ISDV4″# Tablet PC ONLY
                  EndSection

                  Section „InputDevice”
                      Driver   „wacom”
                      Identifier    „cursor”
                      Option   „Device”    „/dev/input/wacom”
                      Option   „Type”    „cursor”
                      Option   „ForceDevice”    „ISDV4″# Tablet PC ONLY
                  EndSection

                  Section „Device”
                      Identifier    „ATI Technologies Inc RV350 AR [Radeon 9600]”
                      Driver   „fglrx”
                      Busid   „PCI:1:0:0”
                  EndSection

                  Section „Monitor”
                      Identifier    „Generic Monitor”
                      Option   „DPMS”
                      Horizsync    30-83
                      Vertrefresh    55-76
                  EndSection

                  Section „Screen”
                      Identifier    „Default Screen”
                      Device   „ATI Technologies Inc RV350 AR [Radeon 9600]”
                      Monitor   „Generic Monitor”
                      Defaultdepth    24
                      SubSection „Display”
                    Depth    1
                    Modes   „1024×768”    „800×600”    „640×480”
                      EndSubSection
                      SubSection „Display”
                    Depth    4
                    Modes   „1024×768”    „800×600”    „640×480”
                      EndSubSection
                      SubSection „Display”
                    Depth    8
                    Modes   „1024×768”    „800×600”    „640×480”
                      EndSubSection
                      SubSection „Display”
                    Depth    15
                    Modes   „1024×768”    „800×600”    „640×480”
                      EndSubSection
                      SubSection „Display”
                    Depth    16
                    Modes   „1024×768”    „800×600”    „640×480”
                      EndSubSection
                      SubSection „Display”
                    Depth    24
                    Modes   „1024×768”    „800×600”    „640×480”
                      EndSubSection
                  EndSection

                  Section „ServerLayout”
                      Identifier    „Default Layout”
                    screen „Default Screen”
                      Inputdevice    „Generic Keyboard”
                      Inputdevice    „Configured Mouse”
                      Inputdevice    „stylus”    „SendCoreEvents”
                      Inputdevice    „cursor”    „SendCoreEvents”
                      Inputdevice    „eraser”    „SendCoreEvents”
                  EndSection

                  Section „DRI”
                      Mode    0666
                  EndSection
                  Section „Extensions”
                      Option   „Composite”    „0”
                  EndSection

                  Hozzászólás: ATI radeon 9600 xt #2122861
                  maczy
                  Felhasználó

                    glxinfora
                    name of display: :0.0
                    display: :0  screen: 0
                    direct rendering: No
                    server glx vendor string: SGI
                    server glx version string: 1.2

                    fglrxinfora
                    display: :0.0  screen: 0
                    OpenGL vendor string: Mesa project: http://www.mesa3d.org
                    OpenGL renderer string: Mesa GLX Indirect
                    OpenGL version string: 1.4 (1.5 Mesa 6.5.2)

                    Hozzászólás: ATI radeon 9600 xt #2122860
                    maczy
                    Felhasználó

                      ha a direct rendering no akkor nem jó a 3d igaz?

                      Hozzászólás: ATI radeon 9600 xt #2122858
                      maczy
                      Felhasználó

                        Sziasztok!

                        A Beryl fut ati kártyával?
                        Ha igen hogy kell elinditani?
                        ELŐRE IS KÖSZÖNÖM

                      10 bejegyzés megtekintése - 1-10 / 16