Hozzászólások
-
Bejegyzés
-
A VIA-s ide-n volt. Átdugtam a HPT-s ide-re. Így valamelyest gyorsult:
engepem roland # hdparm -i /dev/hdg && hdparm -tT /dev/hdg/dev/hdg:
Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y2VGWT4E
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160086528
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4 udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-7 T13 1532D revision 0: ATA/ATAPI-1,2,3,4,5,6,7* signifies the current active mode
/dev/hdg:
Timing cached reads: 218 MB in 2.00 seconds = 108.98 MB/sec
Timing buffered disk reads: 112 MB in 3.03 seconds = 36.93 MB/sec(Közben kb fél óráig a bios sem jött be, azt hittem kihalt a proci, illetve egyszer úgy érzékelte hogy 2Gb memória van a gépben a 650 helyett 😉 )
Nos a gépen a 2.5.22 r5 ös kernel van. A live cd-n tuti régebbi. Valami beállítási különbség lehet, csak vajon mi?
Valószínűleg a HPT-re van dugva. De már próbáltam csak HPT, csak VIA, mind2. Ha csak HPT volt akkor nem akarta az igazat, egyébként ugyanaz. Látszólag.
Gentoo live cd-vel:
/dev/hda:
Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y2VGWT4E
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160086528
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: (null): ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7* signifies the current active mode
/dev/hda:
Timing cached reads: 432 MB in 2.00 seconds = 215.76 MB/sec
Timing buffered disk reads: 72 MB in 3.07 seconds = 23.45 MB/secFeltetepített Gentoo:
/dev/hda:
Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y2VGWT4E
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160086528
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-7 T13 1532D revision 0: ATA/ATAPI-1,2,3,4,5,6,7* signifies the current active mode
/dev/hda:
Timing cached reads: 212 MB in 2.01 seconds = 105.40 MB/sec
Timing buffered disk reads: 62 MB in 3.01 seconds = 20.59 MB/secVisszaállítottam VIA-ra bejelöltem a ” [ ] Boot off-board chipsets first support „-ot illetve kiszedtem a
” Intel PIIXn chipsets support ” -ot. Így a dma-t hajlandó bekapcsolni de sebesség változás nincs.A lemezről sokkal többet nem tudok mint fentebb szerepel, kivéve hogy 80gb-os és hogy 7200rpm-es. Hiába állítom ezt én be, akkor se tudja a dma-t bekapcsolni.
engepem roland # /etc/init.d/hdparm restart
* Caching service dependencies … [ ok ]
* Running hdparm on /dev/hda …
HDIO_SET_DMA failed: Operation not permitted [ ok ]
* Running hdparm on /dev/hdc …
HDIO_SET_DMA failed: Operation not permitted [ ok ]
* Running hdparm on /dev/hdd …
HDIO_SET_DMA failed: Operation not permitted [ ok ]
* Running hdparm on /dev/hdg …
HDIO_SET_DMA failed: Input/output errorEgészen biztos hogy csak a hpt kell nekem?
engepem roland # lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06)
00:09.1 Input device controller: Creative Labs SB Live! Game Port (rev 06)
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
00:0f.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
00:13.0 Mass storage controller: HighPoint Technologies, Inc. HPT366/368/370/370A/372/372N (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3)sany wrote:roleee3 wrote:gentooNem azt írtad hogy „szemben a telepített gentoo-van”
ez nem „gentoo-val” akart lenni?/etc/conf.d/hdparm fájlban mi van?
Igen elírtam javítani fogom.
engepem roland # cat /etc/conf.d/hdparm
# /etc/conf.d/hdparm: config file for /etc/init.d/hdparm# You can either set hdparm arguments for each drive using hdX_args,
# discX_args, cdromX_args and genericX_args, e.g.
#
# hda_args=”-d1 -X66″
# disc1_args=”-d1″
# cdrom0_args=”-d1″# or you can set options for all PATA drives
pata_all_args=”-d1″# or you can set options for all SATA drives
sata_all_args=””# or, you can set hdparm options for all drives
all_args=””sany wrote:„UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 udma6”hdparm -X udma6 /dev/merevlemezed
vagy
hdparm -X 70 /dev/merevlemezedután mennyi az annyi?
http://gentoo-wiki.com/HOWTO_Use_hdparm_to_improve_IDE_device_performance
Ugyanaz mindkettőre.
engepem roland # hdparm -udma6 /dev/hda
/dev/hda:
setting fs readahead to 6
multcount = 16 (on)
unmaskirq = 0 (off)
using_dma = 0 (off)
readahead = 0 (off)
engepem roland # hdparm -tT /dev/hda/dev/hda:
Timing cached reads: 224 MB in 2.01 seconds = 111.64 MB/sec
Timing buffered disk reads: 6 MB in 3.20 seconds = 1.87 MB/sec
engepem roland # hdparm -X 70 /dev/hda/dev/hda:
setting xfermode to 70 (UltraDMA mode6)
engepem roland # hdparm -tT /dev/hda/dev/hda:
Timing cached reads: 220 MB in 2.00 seconds = 109.86 MB/sec
Timing buffered disk reads: 6 MB in 3.21 seconds = 1.87 MB/secgentoo
engepem roland # hdparm -i /dev/hda
/dev/hda:
Model=Maxtor 6Y080L0, FwRev=YAR41BW0, SerialNo=Y2VGWT4E
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160086528
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 udma6
AdvancedPM=yes: disabled (255) WriteCache=enabled
Drive conforms to: ATA/ATAPI-7 T13 1532D revision 0: ATA/ATAPI-1,2,3,4,5,6,7* signifies the current active mode
Kiszedtem a VIA-t beraktam a HPT-t, újrafordítottam. Nem működik. Így már a dma-t se lehet bekapcsolni:
engepem linux # hdparm -d1 /dev/hda
/dev/hda:
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Operation not permitted
using_dma = 0 (off)Egyébként a sebesség ugyanaz.
A chipsetem VIA-s, és ez is van beállítva a kernelbe, illetve ennél a résznél még „Intel PIIXn chipsets support ” mert az olvastam annaki mindig be kéne lennie jelölve.
— ATA/ATAPI/MFM/RLL support │ │
│ │ Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support │ │
│ │ — Please see Documentation/ide.txt for help/info on IDE drives │ │
│ │ [ ] Support for SATA (deprecated; conflicts with libata SATA driver) │ │
│ │ [ ] Use old disk-only driver on primary interface │ │
│ │ Include IDE/ATA-2 DISK support │ │
│ │
[*] Use multi-mode by default │ │
│ │ Include IDE/ATAPI CDROM support │ │
│ │ Include IDE/ATAPI TAPE support (EXPERIMENTAL) │ │
│ │ Include IDE/ATAPI FLOPPY support │ │
│ │ SCSI emulation support │ │
│ │ [ ] IDE ACPI support │ │
│ │ [ ] IDE Taskfile Access │ │
│ │
[*] legacy /proc/ide/ support │ │
│ │ — IDE chipset support/bugfixes │ │
│ │ generic/default IDE chipset support │ │
│ │ [ ] CMD640 chipset bugfix/support │ │
│ │ [ ] PNP EIDE support │ │
│ │
[*] PCI IDE chipset support │ │
│ │ [ ] Sharing PCI IDE interrupts support │ │
│ │ [ ] Boot off-board chipsets first support │ │
│ │ Generic PCI IDE Chipset Support │ │
│ │ OPTi 82C621 chipset enhanced support (EXPERIMENTAL) │ │
│ │ RZ1000 chipset bugfix/support │ │
│ │
[*] Generic PCI bus-master DMA support │ │
│ │ [ ] Force enable legacy 2.0.X HOSTS to use DMA │ │
│ │ [ ] Enable DMA only for disks │ │
│ │ AEC62XX chipset support │ │
│ └─────────────────v(+)───────────────────────────────────────────────────────────────────────────────────┘ │
├──────────────────────────────────────────────────────────────────────────────A VIA fixen benne van, így gondolom nem kell a modult betölteni.
VIA82CXXX chipset supportengepem roland # lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06)
00:09.1 Input device controller: Creative Labs SB Live! Game Port (rev 06)
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
00:0f.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
00:13.0 Mass storage controller: HighPoint Technologies, Inc. HPT366/368/370/370A/372/372N (rev 04)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3)
legutóbbi hsz