Hozzászólások
-
Bejegyzés
-
YUHEJJ!!!!
Szól mind a kettõ!!![root@localhost ~]# aplay -D hw:0,0 /root/Desktop/valami.wav
Playing WAVE ‘/root/Desktop/valami.wav’ : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Warning: rate is not accurate (requested = 44100Hz, got = 48000Hz)
please, try the plug plugin (-Dplug:hw:0,0)[root@localhost ~]# aplay -D hw:1,0 /root/Desktop/valami.wav
Playing WAVE ‘/root/Desktop/valami.wav’ : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
Warning: rate is not accurate (requested = 44100Hz, got = 48000Hz)
please, try the plug plugin (-Dplug:hw:1,0)Most már csak az akérdés, hogyan tudom beállítani két alkalmazás között, hogy melyik melyik kártyáról szóljon?
Elképzelhetõ, hogy nem ismeri fel rewndesen a sb-t?
Az alsamixerben ugyanis az alaplapinál van master meg pcm, de sb-nél nincs csak spdif meg analog, sõt amíg az ac97-nél kiírja a chip-et, addig az sb-nél nem.Ebbõl nem lehet valamit hasznosítani?
[root@localhost proc]# cat /proc/asound/pcm
00-00: Intel ICH : NVidia CK8S : playback 1 : capture 1
00-01: Intel ICH – MIC ADC : NVidia CK8S – MIC ADC : capture 1
00-02: Intel ICH – IEC958 : NVidia CK8S – IEC958 : playback 1
01-00: ca0106 : CA0106 : playback 1 : capture 1
01-01: ca0106 : CA0106 : playback 1 : capture 1
01-02: ca0106 : CA0106 : playback 1 : capture 1
01-03: ca0106 : CA0106 : playback 1 : capture 1[root@localhost proc]# cat /proc/asound/cards
0 [CK8S ]: NFORCE – NVidia CK8S
NVidia CK8S with ALC850 at 0xfc001000, irq 193
1 [CA0106 ]: CA0106 – CA0106
Live! 7.1 24bit [SB0410] at 0xa000 irq 217és még ez is:
[root@localhost proc]# lspci
00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1)
00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller (rev
a2)
00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC’97 Audi o Controller (rev a1)
00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller (v2.5) (r ev a2)
00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5) (rev a2)
00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTra nsport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Con troller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscella neous Control
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600]
01:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Seconda ry)
02:09.0 Multimedia audio controller: Creative Labs SB Audigy LS
02:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139 C+ (rev 10)ööö…
Mit csinálok rosszul?
[root@localhost Desktop]# aplay -d hw:0,0 /root/Desktop/proba.wav
ALSA lib conf.c:1592:(snd_config_load1) _toplevel_:51:23:Nincs ilyen fájl vagy könyvtár
ALSA lib conf.c:2837:(snd_config_hook_load) /etc/alsa/cards/aliases.conf may be old or corrupted: consider to remove or fix it
ALSA lib conf.c:2700:(snd_config_hooks_call) function snd_config_hook_load returned error: Nincs ilyen fájl vagy könyvtár
ALSA lib pcm.c:1969:(snd_pcm_open_conf) Invalid type for PCM default definition (id: default, value: cards.pcm.default)
aplay: main:544: audio open error:
legutóbbi hsz