Hozzászólások
-
Bejegyzés
-
Még annyit hogy ha elinditom a xawtv-t akkor elindul csak nem lehet vele semmit csinálni és ezt irja:
This is xawtv-/var/uhubuild/work/compile, running on Linux/i686 (2.6.17.6-10)
/dev/video0 [v4l2]: no overlay support
v4l-conf had some trouble, trying to continue anyway
Warning: Cannot convert string „-*-ledfixed-medium-r-*–39-*-*-*-c-*-*-*” to type FontStructHa kiadom a scantv parancsot akkor ez jön fel:
please select your TV norm
0: PAL
1: PAL-DK
2: PAL-I
3: NTSC
4: SECAM
5: PAL-M
nr ? 0please select a frequency table
0: us-bcast
1: us-cable
2: us-cable-hrc
3: japan-bcast
4: japan-cable
5: europe-west
6: europe-east
7: italy
8: newzealand
9: australia
10: ireland
11: france
12: china-bcast
13: southafrica
14: argentina
15: australia-optus
16: russia
nr ? 6
[global]
freqtab = europe-east[defaults]
input = Television
norm = PALioctl: VIDIOC_S_CTRL(id=9963778;value=12): Invalid argument
ioctl: VIDIOC_S_CTRL(id=9963776;value=0): Invalid argument
ioctl: VIDIOC_S_CTRL(id=9963777;value=12): Invalid argument
vbi: open failed [/dev/vbi]
open /dev/vbi: No such deviceNa akkor sorban 🙂
lsusb
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 004: ID eb1a:2820 eMPIA Technology, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 002 Device 002: ID 03f0:b402 Hewlett-Packard
Bus 002 Device 003: ID 045e:006a Microsoft Corp.v4l-info (ebből nekem úgy tűnik a tunerrel van gond)
general info
VIDIOC_QUERYCAP
driver : „em28xx”
card : „Leadtek Winfast USB II”
bus_info : „1-7”
version : 0.0.1
capabilities : 0x5030041 [VIDEO_CAPTURE,?,TUNER,AUDIO,READWRITE,STREAMING]standards
VIDIOC_ENUMSTD(0)
index : 0
id : 0xff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K]
name : „PAL”
frameperiod.numerator : 1
frameperiod.denominator : 25
framelines : 625
VIDIOC_ENUMSTD(1)
index : 1
id : 0xb000 [NTSC_M,NTSC_M_JP,?]
name : „NTSC”
frameperiod.numerator : 1001
frameperiod.denominator : 30000
framelines : 525
VIDIOC_ENUMSTD(2)
index : 2
id : 0xff0000 [SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB]
name : „SECAM”
frameperiod.numerator : 1
frameperiod.denominator : 25
framelines : 625
VIDIOC_ENUMSTD(3)
index : 3
id : 0x100 [PAL_M]
name : „PAL-M”
frameperiod.numerator : 1001
frameperiod.denominator : 30000
framelines : 525inputs
VIDIOC_ENUMINPUT(0)
index : 0
name : „Television”
type : TUNER
audioset : 0
tuner : 0
std : 0xffb1ff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K,PAL_M,NTSC_M,NTSC_M_JP,?,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB]
status : 0x0 []
VIDIOC_ENUMINPUT(1)
index : 1
name : „Composite1”
type : CAMERA
audioset : 0
tuner : 0
std : 0xffb1ff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K,PAL_M,NTSC_M,NTSC_M_JP,?,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB]
status : 0x0 []
VIDIOC_ENUMINPUT(2)
index : 2
name : „S-Video”
type : CAMERA
audioset : 0
tuner : 0
std : 0xffb1ff [PAL_B,PAL_B1,PAL_G,PAL_H,PAL_I,PAL_D,PAL_D1,PAL_K,PAL_M,NTSC_M,NTSC_M_JP,?,SECAM_B,SECAM_D,SECAM_G,SECAM_H,SECAM_K,SECAM_K1,SECAM_L,?ATSC_8_VSB]
status : 0x0 []tuners
VIDIOC_G_TUNER(0)
index : 0
name : „Tuner”
type : unknown
capability : 0x0 []
rangelow : 0
rangehigh : 0
rxsubchans : 0x0 []
audmode : MONO
signal : 0
afc : 0video capture
VIDIOC_ENUM_FMT(0,VIDEO_CAPTURE)
index : 0
type : VIDEO_CAPTURE
flags : 0
description : „Packed YUY2”
pixelformat : 0x56595559 [YUYV]
VIDIOC_G_FMT(VIDEO_CAPTURE)
type : VIDEO_CAPTURE
fmt.pix.width : 720
fmt.pix.height : 576
fmt.pix.pixelformat : 0x56595559 [YUYV]
fmt.pix.field : INTERLACED
fmt.pix.bytesperline : 1440
fmt.pix.sizeimage : 829440
fmt.pix.colorspace : SMPTE170M
fmt.pix.priv : 0controls
### video4linux device info [/dev/video0] ###
general info
VIDIOCGCAP
name : „Leadtek Winfast USB II”
type : 0x3 [CAPTURE,TUNER]
channels : 3
audios : 0
maxwidth : 360
maxheight : 576
minwidth : 48
minheight : 32channels
VIDIOCGCHAN(0)
channel : 0
name : „Television”
tuners : 1
flags : 0x1 [TUNER]
type : TV
norm : 0
VIDIOCGCHAN(1)
channel : 1
name : „Composite1”
tuners : 0
flags : 0x0 []
type : CAMERA
norm : 0
VIDIOCGCHAN(2)
channel : 2
name : „S-Video”
tuners : 0
flags : 0x0 []
type : CAMERA
norm : 0tuner
VIDIOCGTUNER
tuner : 0
name : „Tuner”
rangelow : 0
rangehigh : 0
flags : 0x7 [PAL,NTSC,SECAM]
mode : PAL
signal : 0audio
ioctl VIDIOCGAUDIO: Invalid argumentpicture
VIDIOCGPICT
brightness : 0
hue : 0
colour : 0
contrast : 0
whiteness : 0
depth : 63381
palette : YUYVbuffer
ioctl VIDIOCGFBUF: Invalid argumentwindow
VIDIOCGWIN
x : 0
y : 0
width : 720
height : 576
chromakey : 0
flags : 0xawtv -hwscan
This is xawtv-/var/uhubuild/work/compile, running on Linux/i686 (2.6.17.6-10)
looking for available devices
port 73-73
type : Xvideo, image scaler
name : ATI Radeon Video Overlay/dev/video0: OK [ -device /dev/video0 ]
type : v4l2
name : Leadtek Winfast USB II
flags: capture tuner
